Pruebe con el comando banner en el ok> del fourth tool kit. >From: "Control y Automatizacion (Rodolfo Piedra)" <rpiedra@xxxxxxxxxxx> >Reply-To: foxboro@xxxxxxxxxxxxx >To: foxboro@xxxxxxxxxxxxx >Subject: [foxboro] AW and WP51D RAM expansion. >Date: Tue, 04 Mar 2003 11:22:08 +0000 > >Dear fellows: > >We want to increase RAM in ours AW51D and WP51D, actually 128MB and 64MB, >but we are not sure which Ultra 5-10 model (360, 440, 333, etc) 51D box is. > >We plan to use "256mb kit (2pcs of 128mb edo dimm) 50ns p/n 370-3798" used >dimms, question here is if it will add RAM or replace existing ones. > >Thanks in advance for sharing your experience in this matter. > >Regards, > >Rodolfo Piedra >Control y Automatización SA >PO Box 1612-7050 >Costa Rica >Cellular +506 834-1921 >Ph: +506 256-9901 >Fax: +506 223-3539 / 257-5392 >rpiedra@xxxxxxxxxxx > > > > >_______________________________________________________________________ >This mailing list is neither sponsored nor endorsed by Invensys Process >Systems (formerly The Foxboro Company). Use the info you obtain here at >your own risks. Read http://www.thecassandraproject.org/disclaimer.html > >foxboro mailing list: //www.freelists.org/list/foxboro >to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join >to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > _________________________________________________________________ _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave