I never had any luck either, had to use a parallel cable loopback to a serial port. Ted On Aug 26, 2012, at 8:57 PM, William C Ricker wrote: > List; > > > Is there one among us who has managed to access messages collected > > by the AIM* historian using the AIM*API calls ft_FdbMsgQuery ? We are > > able to retrieve other information from the historian, but not messages. > > > > We are aware that the 3.3 version of AIM* ships without the necessary > > files to make OLE-DB work, so we can't make that method work. After > > various failed attempts at programmed access we wonder if there is some > > mismatch between document and code, or if there might be some > > deficiency in this function as distributed in the V 3.3 release. > > > > If someone else has made it work and perhaps even feels inclined to > > forward an example we would be grateful. > > > > Thanks, > > William C Ricker > > FeedForward, Inc. > > > > > > > > > > _______________________________________________________________________ > This mailing list is neither sponsored nor endorsed by Invensys Process > Systems (formerly The Foxboro Company). Use the info you obtain here at > your own risks. Read http://www.thecassandraproject.org/disclaimer.html > > foxboro mailing list: //www.freelists.org/list/foxboro > to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join > to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave