You undoubtedly saw that the visible of the UPDATE button is connected to SCNTYP. When ABSCAN is in event-driven mode (SCNTYP=1) the UPDATE button is visible and selecting it sets UPDATE to 1, thereby forcing an ABSCAN update as if an event had triggered it. UPDATE should then reset back to 0 to await the next trigger, either by an event or by the UPDATE button. Normally the A-B controller monitors its data table and sends a trigger if it sees any change. Although I haven't tried it, you should be able to set UPDATE from any script and accomplish the same result. When SCNTYP=0, the ABSCAN is in polled mode and doesn't wait for a trigger from the controller, but rather sends read messages on a regular basis. The UPDATE button is invisible. You're correct that the UPDATE button is not documented well (at all) in B0193RG, which is very detailed in describing the SCNTYP variations, and the operation of UPDATE should derive naturally from that. Brad Wilson brad.wilson@xxxxxxxxxxxxxxxx Invensys Process Systems, Inc 1090 King Georges Post Rd, Suite 204 Edison, NJ 08837 732-661-4012 o 732-874-0087 c -----Original Message----- From: foxboro-bounce@xxxxxxxxxxxxx [mailto:foxboro-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Ruhland Sent: Wednesday, June 10, 2009 6:43 PM To: foxboro@xxxxxxxxxxxxx Subject: Re: [foxboro] ABSCAN Detail Display information a clarification: There is a button on the Detailed Display for the ABSCAN block labelled UPDATE. This sets the UPDATE parameter on the block to a 1. What does this UPDATE parameter do? Is there any documentation available for this? On Wed, Jun 10, 2009 at 3:24 PM, Tim Ruhland <truhland@xxxxxxxxx> wrote: > Hi all, > > Simple question, but one that has me stumped: > On the Detail Display for an Integrator 30 ABSCAN block, what does the > UPDATE parameter do? > > Special Guru Bonus Attibution available if you can reference any Foxboro > documentation which explains this. > > Regards, > Tim Ruhland > Automation Engineer > Eichleay Engineers of California > Concord, CA 94520 > (925)-363-3187 > > > _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave ** Confidentiality Notice: This e-mail, including any associated or attached files, is intended solely for the individual or entity to which it is addressed. This e-mail is confidential and may well also be legally privileged. If you have received it in error, you are on notice of its status. Please notify the sender immediately by reply e-mail and then delete this message from your system. Please do not copy it or use it for any purposes, or disclose its contents to any other person. This email is from the Invensys Process Systems business unit of the Invensys Group, a group of companies owned by Invensys plc, which is a company registered in England and Wales with its registered office at Portland House, Bressenden Place, London, SW1E 5BF (Registered number 166023). For a list of European legal entities within the Invensys Group, please go to http://www.invensys.com/legal/default.asp?top_nav_id=77&nav_id=80&prev_id=77. You may contact Invensys plc on +44 (0)20 7821 3848 or e-mail inet.hqhelpdesk@xxxxxxxxxxxxx This e-mail and any attachments thereto may be subject to the terms of any agreements between Invensys (and/or its subsidiaries and affiliates) and the recipient (and/or its subsidiaries and affiliates). _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave