Re: [foxboro] loading an alarm match specification file on startup of an alarm cad

There is also HH935 "Alarm Manager Filter Configuration" on TAC website that
maybe of some help as well.
Jim

On Wed, Jun 10, 2009 at 4:39 PM, Jim Kahlden <jim.kahlden@xxxxxxxxx> wrote:

> Jeremy,
>
> Seems like I did something like this once.  If I remember correctly, I put
> a line in the .ENV operator environment file something like this:
>
> dmcmd rcntalms -match /usr/fox/customer/alarms/amspec/matchfile.ams
>
> where the matchfile.ams was the saved file created using the document
> B0193RV you mentioned.
>
>
> Jim Kahlden
>
>   On Wed, Jun 10, 2009 at 4:21 PM, Jeremy Milum <jmilum@xxxxxxxxx> wrote:
>
>> here's my setup: dual headed system (unix v. 7.1.2, foxview)
>>
>> here's what I want to do: have two alarm cads, one assigned to each
>> head (A and B) I want only priority 1, 2 and 3 alarms to go to the
>> alarm cad on head A, and only priority 4 alarms to go to head B
>>
>> I think I know how to assign the cads to the separate heads by editing
>> the dmcfg.
>>
>> and i may know how to filter alarms by priority by using a match file
>> (page 102-107 of B0193RV), but what i cannot figure out is how to make
>> the alarm cad load the match file when it starts up. the a fore
>> mentioned document speaks of calling the match file from a button, but
>> I don't want the operators to have to *do* anything for this to
>> happen.
>>
>> is there a startup file I could run a display manager command in to do
>> that? thoughts?
>>
>> -
>> Patron saints in general are broadband connections to the Almighty
>> - Michelle Delio, Wired News
>>
>>
>> _______________________________________________________________________
>> This mailing list is neither sponsored nor endorsed by Invensys Process
>> Systems (formerly The Foxboro Company). Use the info you obtain here at
>> your own risks. Read http://www.thecassandraproject.org/disclaimer.html
>>
>> foxboro mailing list:             http://www.freelists.org/list/foxboro
>> to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
>> to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
>>
>>
>


 
 
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
 
foxboro mailing list:             http://www.freelists.org/list/foxboro
to subscribe:         mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe:      mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave

Other related posts: