hi all knowing list I am trying to do a test setup of IA 6.3 (solaris 2.5.x) on a WP51D. I need to connect this to a advanced application (APC ) in company lab network via a secondary ethernet port. Can some body help me with some pointers on this front. some specific inputs i am looking for are - how to configure DHCP on the machine ( do u need to configure it at all) - what are the changes that need to be done on the /etc/netmasks file - what are the changes that need to be done on the hosts file the ethernet port is a Twisted-Pair 10/100 Mbps Ethernet Interface with MII Connector PCI Card. thanks in advance Pavan _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave