Hi List : I have a WP51A ver. 4.0 running DM since a long time ago (1994). This machine is a tiny SUN box with a built-in TP ether port and a BNC/AUI LAN card (not built-in). I would like to have an additional access to this machine through the TP port, however this machine only sees "le0" as the only eth port and it is pointing to the BNC/AUI Lan card. It looks like the TP port is disable somehow from the PROM level, but I don't find a parameter for this. Is there a way to enable or use this TP port or it is hard disabled? Is it a jumper on the board? How it is solved? Thanks in advanced for any reply! Jose R. Medina-Delgado - P.E. Automation Engineer Engineering/Process Control & Automation Pfizer Global Manufacturing - Arecibo Site Phone : 787.775.5421 Fax : 787.775.7030 E-Mail : jose.r.medina@xxxxxxxxxx _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave