Hi, list I have the following question: Imagine that I have six different environments in my installation, so= when I open a the Main Foxview Window I am able to Change Environment= to any of them, is there a way to open an additional Foxview (Release 6.1.1) and in that particular additional Foxview avoid any user to go= to some of the environments previously mentioned?, i.e. maybe disabling = that one from the list? Thanks in advance for your help and regards Raymundo M=E9ndez PDVSA Manufactura y Mercadeo Refiner=EDa El Palito Zona Postal 2023A Apartado Postal 102 Departamento de Automatizaci=F3n Industrial Equipo de MCP Tel=E9fono: 58-242-3603518 Fax: 58-242-3604766 E-mail: mendezrw@xxxxxxxxx= *************** PDVSA´S INTERNET E-MAIL USE *************** This message may contain information solely of the interest of PDVSA or its businesses. Copying, distribution, disclosure or any use of the information contained in this transmission is permitted only to authorized parties. If you have received this e-mail by error, please destroy it and notify webmaster@xxxxxxxxx or the sender by reply email. ****** USO DEL CORREO ELECTRONICO DE PDVSA HACIA INTERNET ****** Esta nota puede contener informacion de interes solo para PDVSA o sus negocios. Solo esta permitida su copia, distribucion o uso a personas autorizadas. Si recibio esta nota por error, por favor destruyala y notifique al remitente o a webmaster@xxxxxxxxxx ___________________________________________________________________ This list is neither sponsored nor endorsed by The Foxboro Company. Use the information obtained here at your own risk. For disclaimer, see http://www.thecassandraproject.org/disclaimer.html#maillist list info: //www.freelists.org/list/foxboro subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave