[foxboro] CP missing from Select
- From: aad@xxxxxxxxxxxxx
- To: foxboro@xxxxxxxxxxxxx
- Date: Tue, 29 May 2007 23:03:05 +0200 (SAST)
Hello List
I have observed that a CP which was added recently that does not appear in
all the Select listings of all the AW51D's.
The site is set up as follows:
AW1 - CSA, CP host and system monitor, Solaris-Fox I/A Ver 6.5.4
AW2 - CP host and system monitor, Solaris-Fox I/A Ver 6.5.4
AW3 - CP host and system monitor, Solaris-Fox I/A Ver 6.5.4
Several CP60's, CP40's and Modicon Gateways.
The new CP was added to be hosted by AW3.
The new CP appears in the CSA report of AW1, the system monitors and the
following lists:
1. Select listing of AW3
2. Station list of the ICC in AW3
The CP does not appear in these lists on the other two AW51D's. All other
Stations are working are fine. As it is hosted by AW53, all Engineering of
this CP is available from AW3.
Any assistance with correcting this will be appreciated.
Thanks
Ashley Davey
South Africa
-------------------------------------------
South Africas premier free email service - www.webmail.co.za
------------------------------------------------------------------
For super low premiums, click here http://www.webmail.co.za/dd.pwm
_______________________________________________________________________
This mailing list is neither sponsored nor endorsed by Invensys Process
Systems (formerly The Foxboro Company). Use the info you obtain here at
your own risks. Read http://www.thecassandraproject.org/disclaimer.html
foxboro mailing list: //www.freelists.org/list/foxboro
to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join
to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave
Other related posts:
- » [foxboro] CP missing from Select
