Dear All, I am having I/A series 2.3 installed. I have created some templates with Bulk generation. At the time of Bulk Generation I was not having enough data for alarms. Now I am having the complete data for alarms(Alarm rationalization) for each block and I want this to incorporate. Can anyone tell me that is there any way to implement this changes directly without breaking link of CST and CSD online?? Regards, Chintan Ballar Project Engineer, Confidentiality Notice: The information contained in this electronic message and any attachment(s) to this message are intended for the exclusive use of the recipient(s) and may contain confidential, privileged or proprietary information. If you are not the intended recipient, please notify the sender immediately, delete all copies of this message and any attachment(s). Any other use of the E-Mail by you is prohibited. Confidentiality Notice: The information contained in this electronic message and any attachment(s) to this message are intended for the exclusive use of the recipient(s) and may contain confidential, privileged or proprietary information. If you are not the intended recipient, please notify the sender immediately, delete all copies of this message and any attachment(s). Any other use of the E-Mail by you is prohibited. _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave