Dear All I am working on one system having AW51B as server and also WPs. There is also one AW70 which is used as OPC server using AIM* OPC server. The Sysmgm is showing this AW70 as failed. Whereas the operating system of this XP PC is OK and AIM* OPC server is running. This is connected via RCNI, Enterasys switch and NCNI to the Nodebus. Because of this OPC communication is not happening. Can any one suggest any actions first of all to bring this machine out of failed state in Sys_Mgmt" and secondly for the OPC communication. Also FoxView is not running. What can I do to run FoxView on that machine as there is no icon. Regards, Kashif Ijaz Senior Design & Application Engineer INTECH Process Automation. _________________________________________________________________ Connect to the next generation of MSN Messenger http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline _______________________________________________________________________ This mailing list is neither sponsored nor endorsed by Invensys Process Systems (formerly The Foxboro Company). Use the info you obtain here at your own risks. Read http://www.thecassandraproject.org/disclaimer.html foxboro mailing list: //www.freelists.org/list/foxboro to subscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=join to unsubscribe: mailto:foxboro-request@xxxxxxxxxxxxx?subject=leave