The one "gotcha" we ran into was that you can't have a Public Folder store on the CCR cluster and setup tries to create that as the first thing. We ended up creating a VM for just the public folders and then going through the setup on the cluster.
Great stuff I will start from there. I have the ISCSI targets setup and created the necessary drives.
From: "GTaylor@xxxxxxxx" <GTaylor@xxxxxxxx>
Once you get your Iscsi Drivers/RDAC etc setup and working properly take a look at Exchange CCR clustering. It’s pretty straight forward to setup. I haven’t done it with Iscsi, but in our IBM SAN environment it works great.
Just want to try this out for Proof of Concept. I want to setup 2 exchange 2007 servers clustered using a single ISCSI target as shared storage. If anyone can point me to thr right white papers I would be grateful.
Windows 2008 ent - Hyper-v
Windows 2008 AD
4 VM's - 1 DC, 2 member servers to act as exchange 2007 cluster
6 GB Ram
120GB OS Partition per VM
1 Openfiler IScsi Box - 500GB
3 * 1GB Nics
Regional Health's mission is to provide and support health care excellence in partnership with the communities we serve.
Note: The information contained in this message, including any attachments, may be privileged, confidential, or protected from disclosure under state or federal laws . If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is strictly prohibited. If you have received this communication in error, please notify the Sender immediately by a "reply to sender only" message and destroy all electronic or paper copies of the communication, including any attachments.