From one scope? No. Good question thou, but not for email peoples. On 1/31/06, Mohammed Tantawi <Mohammed.Tantawi@xxxxxxxxxxxxxx> wrote: > http://www.MSExchange.org/ > > Dear All, > > I am in My network Have 200 Users & I need to give them this settings on > the > IP- Address :- > > IP: 192.168.1.8 > SM: 255.255.255.0 > GW: 90.0.0.1-metric ( Automatic ) > DNS: 192.168.1.1 > > But i want to Add 2 IP Address on the Network Card which will optain > the IP > Address from THE DHCP , and i want to add also 2 Gateway, but one > Gateway > will be its matric as default & the Other one will be ( metric 2 ) . > > so my questions, how can i configure the DHCP to Broad cast 2 IP-Address > & 2 > Gateway from one scope ? > > Please some one help me how can i do that ? > > > ------------------------------------------------------ > List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist > Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp > ------------------------------------------------------ > Visit TechGenix.com for more information about our other sites: > http://www.techgenix.com > ------------------------------------------------------ > You are currently subscribed to this MSExchange.org Discussion List as: > richard.van.beers@xxxxxxxxx > To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=exchangelist > Report abuse to info@xxxxxxxxxxxxxx >