Give some of what you smoked before you posted this question. This must gooooooood stuff -----Original Message----- From: Mohammed Tantawi [mailto:Mohammed.Tantawi@xxxxxxxxxxxxxx] Sent: Tuesday, January 31, 2006 11:08 AM To: [ExchangeList] Subject: [exchangelist] Urgent Request http://www.MSExchange.org/ Dear All, I am in My network Have 200 Users & I need to give them this settings on the IP- Address :- IP: 192.168.1.8 SM: 255.255.255.0 GW: 90.0.0.1-metric ( Automatic ) DNS: 192.168.1.1 But i want to Add 2 IP Address on the Network Card which will optain the IP Address from THE DHCP , and i want to add also 2 Gateway, but one Gateway will be its matric as default & the Other one will be ( metric 2 ) . so my questions, how can i configure the DHCP to Broad cast 2 IP-Address & 2 Gateway from one scope ? Please some one help me how can i do that ? ------------------------------------------------------ List Archives: http://www.webelists.com/cgi/lyris.pl?enter=exchangelist Exchange Newsletters: http://www.msexchange.org/pages/newsletter.asp ------------------------------------------------------ Visit TechGenix.com for more information about our other sites: http://www.techgenix.com ------------------------------------------------------ You are currently subscribed to this MSExchange.org Discussion List as: mjtech@xxxxxxxxx To unsubscribe visit http://www.webelists.com/cgi/lyris.pl?enter=exchangelist Report abuse to info@xxxxxxxxxxxxxx