[eagleengineering] Re: FW: **FIRST EMAIL**/Parts at the Championship

  • From: "Jim Molenda" <jim@xxxxxxxxxx>
  • To: <eagleengineering@xxxxxxxxxxxxx>
  • Date: Tue, 12 Apr 2005 06:35:44 -0700

I had Nancy order 2 of the 40 amp breakers last week from IFI. She should
already have them.
 
Jim

  _____  

From: eagleengineering-bounce@xxxxxxxxxxxxx
[mailto:eagleengineering-bounce@xxxxxxxxxxxxx] On Behalf Of Jeff Kane
Sent: Monday, April 11, 2005 8:16 PM
To: eagleengineering@xxxxxxxxxxxxx
Subject: [eagleengineering] Re: FW: **FIRST EMAIL**/Parts at the
Championship


Did someone get spare fuses yet?  The only place I've found that has the
kind is Innovation First, and I wouldn't depend on Spare Parts having one.
On Saturday when we went to them for the fuse, they didn't have any, yet I
was able to get a whole new set of bearings for the wheels.  So we may want
to order some fuses.
 
Jeff


Madalyn Berns <tchglitzgirl5@xxxxxxxxxxx> wrote:

If you read the info below....there will be a Master Code 11 available
before the championships.  Although it is not required we might consider
reloading it.  It will prevent the robot motors from possibly jumping when
started up if not in disable mode.  Just a precaution.  Also it says to
order LEDs from innovation first for the championship.....i belive the ones
we have are perfectly acceptable.  If anyone else sees anything differently,
let me know ASAP so that I can order more.

~Madalyn



>From: "Nancy McIntyre" <nmcintyre@xxxxxxxxxxxxx> 
>To: <tchglitzgirl5@xxxxxxxxxxx> 
>Subject: FW: **FIRST EMAIL**/Parts at the Championship 
>Date: Mon, 11 Apr 2005 13:38:03 -0700 
> 
> 
> 
> 
> 
>   _____ 
> 
>From: FRCteams [mailto:frcteams@xxxxxxxxxxx] 
>Sent: Monday, April 11, 2005 11:48 AM 
>To: @chaminade.org 
>Subject: **FIRST EMAIL**/Parts at the Championship 
> 
> 
> 
>Greetings Teams: 
> 
>This is a reminder to all teams regarding parts at Championship. 
> 
>Team LEDs 
>You must order your LED clusters from Innovation First in order to receive 
>them in time for the Championship.  There will be NONE available through 
>Spare Parts. 
> 
>Spare Parts 
> 
>Available: Motors, pneumatics, and many other items.  Please remember, you 
>must turn in the broken part in order to receive a new one. 
> 
>Not Available: 
> 
>* circuit breakers 
>* pwm cables 
>* fuse panels 
>* wheels 
>* metal of any kind 
>* transmission or drive train components 
>* screws, nuts, bolts, washers 
> 
>Innovation First Support at the Championship 
>Innovation First will have staff available on all fields and in the Pit to 
>assist with problems.  Please come to the Spare Parts table to request help

>from an Innovation First staff member.  They will come to your pit station 
>as soon as possible. 
> 
>Control systems will be available on a first-come, first-served basis,
after 
>Innovation First approval and proper documentation/ paperwork to ensure its

>return after the event has ended. 
> 
>Robot Controller Issue 
>It is possible for the PWM outputs 6-12 to become active for a fraction of
a 
>second when a Link is established, if the OI is not in a Disabled Mode. 
>This condition can cause motors to jump when a Link is established whether 
>using Radio or Tether.  This condition will not happen on the Competition 
>Field at a FIRST Event because the OI will power-up in a Disabled Mode.  If

>you are concerned with this issue, you can up-grade your Master Code to 
>Version 11 or build a Dongle for the OI Competition Port.  Master Code 
>Version 11 will soon be available on the Robot Controller web page at: 
> 
> 
>http://www.ifirobotics.com/rc.shtml 
> 
> 
>Master Code Version 11 will not be required to compete at the Championship.

>Instructions for building a Dongle are on the RC web page.  Teams can use a

>Dongle connected to the Competition Port on the OI that will allow
switching 
>between the Disabled and Enabled Mode.  Always verify that the OI will 
>power-up in a Disabled Mode using your Dongle when not connected to an
Arena 
>Controller. 
> 
>Go Teams! 
> 


  _____  

Do you Yahoo!?
Yahoo! Small Business - Try
<http://us.rd.yahoo.com/evt=31637/*http://smallbusiness.yahoo.com/resources/
> our new resources site! 

Other related posts: