MessageAnn Foxworth asked the same thing. There were no codes showing, but in adding the code (p) all the lines clicked back in place. Thanks for your suggestion. Ardell Nolte ----- Original Message ----- From: Susan Stageberg To: duxuser@xxxxxxxxxxxxx Sent: Monday, August 04, 2003 9:35 AM Subject: [duxuser] Re: getting braille lines to start at cell one Ardell, do ou ahve the codes revealed? (alt-F3?) Susie Stageberg Project ASSIST with Windows Iowa Department for the Blind -----Original Message----- From: Laroy Nolte [mailto:lrnolte@xxxxxxxxxx] Sent: Saturday, August 02, 2003 6:34 PM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: getting braille lines to start at cell one ----- Original Message ----- From: Laroy Nolte To: duxuser@xxxxxxxxxxxxx Sent: Saturday, August 02, 2003 7:48 PM Subject: [duxuser] Re: getting Braille lines to start at cell one There are no codes showing. Ardell ----- Original Message ----- From: Foxworth Ann To: duxuser@xxxxxxxxxxxxx Sent: Friday, August 01, 2003 8:47 AM Subject: [duxuser] Re: getting Braille lines to start at cell one It sounds to me like there's some kind of style activated in that document. What codes did you see? Ann Foxworth, Computer Braille Specialist Texas Commission for the Blind 4800 N. Lamar BLVD Suite # 130 Austin, TX 78756 PH: (512) 377-0654 -----Original Message----- From: Laroy Nolte [mailto:lrnolte@xxxxxxxxxx] Sent: Thursday, July 31, 2003 8:38 PM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] getting Braille lines to start at cell one I'm working on a document and have done some rearranging of lines on a page. Now however, the lines do not start in cell one, some start in cell 4, others in cell 5 or 3 or 10. When I bring up the codes (alt F3) it shows all the lines start in the proper cell but the Braille lines show differently. Solution? Also, I'm trying to place a title page between two pages that are already brailled and cannot do it. Ardell Nolte