[duxuser] SV: Re: SV: Re: How to invoke the licens?
- From: "Anders Holmberg" <anders@xxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sun, 23 Aug 2009 19:11:45 +0200
Hello George!
You were correct.
I had to move the paper a bit and i hadn't set the paper try right.
At last i got it to work.
It seems it can do a lot of things this great program.
Are there any free audio or text tutorials to download anywhere?
/Anders.
-----Ursprungligt meddelande-----
Från: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] För
George Bell
Skickat: den 23 augusti 2009 19:04
Till: duxuser@xxxxxxxxxxxxx
Ämne: [duxuser] Re: SV: Re: How to invoke the licens?
Hi Anders,
I presume you have selected the correct embosser it DBT's Global: Embosser
Setup menu.
Do you mean that the first two characters of each line or not embossing?
I am not familiar with the Blista BTec 100, but I wonder if perhaps you need
to move the paper further left? A4 paper, which is 210 mm wide (or 8.25
inches), should easily accommodate 30 braille characters per line.
George.
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Anders Holmberg
Sent: 22 August 2009 21:53
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] SV: Re: How to invoke the licens?
Hello George!
Thanks for your excelent help.
A nother question.
I just tried it in demo mode here and i was embosing at text. It seems to
work fine but one thing went wrong. I don't know if i have set the left
margin wrong but it seems not the complete text comes with my printing. It
begins one or two letters in the sentences. My line withth is set to 30 and
the left margin is set to 1. The printer is a btec a00. I am using a4
papers, i can't say how many inches a4 papers are exactly. /Anders.
-----Ursprungligt meddelande-----
Från: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] För
George Bell
Skickat: den 22 augusti 2009 22:34
Till: duxuser@xxxxxxxxxxxxx
Ämne: [duxuser] Re: How to invoke the licens?
Hej Andres,
If you have a single-user license, you should also have what is called
"License Text". Although I cannot guarantee it at this point world-wide,
here in the United Kingdom, it is usually along the lines
of:-
DBT X####-####
That is to say the upper case letters DBT followed by a space, then an upper
case letter followed unspaced by four numbers, then a hyphen or dash
followed by 8 more numbers.
This is usually supplied on a yellow card in braille and large print with
the CD.
You will normally be asked to enter this license text at the early stages of
installation.
If you are struggling over the weekend, I'll be monitoring the list and will
try to assist further if you need help.
George Bell.
(From Northampton, England, UK)
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Anders Holmberg
Sent: 22 August 2009 21:22
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] How to invoke the licens?
Hi!
When invoking the licens key in Duxburry do i have to do something special
first? I understand i have to type dbt first but should i put a space bar or
a dash after? /Anders.
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
