[duxuser] Re: Everest_D V3 Setup
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Sat, 2 Jun 2012 18:29:01 +0100
Look in DBT's Global menu: Embosser Setup. Make sure your Everest is
selected, then go down to the Desired Braille Document Formatting
section and select A4 Form size there.
It will set up some defaults, so try those to begin with, and you can
tweak things if they are not correct later.
Make sure you also have the Everest selected in your Document:
Embosser Setup if you are editing an existing file.
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Tewai Halatau
Sent: 02 June 2012 12:36
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Everest_D V3 Setup
Hello List Members,
Sorry to ask a basic newby question, but I cannot work it out and
cannot find the answer anywhere.
I am running:
Windows 7 64-bit
DBT 11.1 SR4
Everest-D V3 10.21 firmware as a generic text only device
I want to emboss on A4 portrait paper. What are the settings for
characters per line, lines per page, top margin and binding margin?
Thank you in advance for any assistance.
Tewai Halatau
Other related posts:
