[duxhelp] Re: For Autobuild users only.
- From: "Jack Maartman" <jmaartman@xxxxxxxxxxx>
- To: <duxhelp@xxxxxxxxxxxxx>
- Date: Tue, 1 Jun 2004 13:22:08 -0700
I haven't printed to file yet, as I have to set up this feature, apparently
in installing a printer. It requires insertion of the Windows cd, and as my
cds are unlabelled, I'll get around to it, hopefully before, I buy the
equipment to label my cds.
A bit off topic, but lacking a monitor, and being severely impaired, I use a
desktop PC, a wireless keyboard, and a set of radio headphones or external
speaker, These devices don't have to be lined up with the pc to work, so I
can work in the back yard, with a device lighter than a lap-top. Now if
there were only wireless embossers, or refreshable braille
displays/notetakers .. Maybe George can invent such a system.
Jack
----- Original Message -----
From: "Peter Sullivan" <peter@xxxxxxxxxx>
To: <duxhelp@xxxxxxxxxxxxx>
Sent: Tuesday, June 01, 2004 12:55 PM
Subject: [duxhelp] Re: For Autobuild users only.
> Jack,
>
> I am unable to replicate the particular problem you have printing to file.
>
> - Peter
>
> -----Original Message-----
> From: duxhelp-bounce@xxxxxxxxxxxxx [mailto:duxhelp-bounce@xxxxxxxxxxxxx]
On
> Behalf Of Jack Maartman
> Sent: Friday, May 28, 2004 11:49 PM
> To: duxhelp@xxxxxxxxxxxxx
> Subject: [duxhelp] Re: For Autobuild users only.
>
> Is it possible to "print to file," using no page numbers, no form feeds
and
> a <cr> as (eol) character? Whenever I try this I get the message error in
> line -1.
>
> Jack
>
>
> ----- Original Message -----
> From: "Jack Maartman" <jmaartman@xxxxxxxxxxx>
> To: <duxhelp@xxxxxxxxxxxxx>
> Sent: Friday, May 28, 2004 8:17 PM
> Subject: [duxhelp] Re: For Autobuild users only.
>
>
> > Same behaviour in the beta more or less, however the default number of
> > lines for 10 inch 22 twenty-two, I think. The top margin still reverts
10
> in
> > 2,0 12 in 1,0.
> >
> > ----- Original Message -----
> > From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
> > To: <duxhelp@xxxxxxxxxxxxx>
> > Sent: Friday, May 28, 2004 4:56 PM
> > Subject: [duxhelp] For Autobuild users only.
> >
> >
> > > If you are not on the Untested Autobuild access list, and if you have
a
> > > build earlier than 28th May, please ignore this message.
> > >
> > > If you DO have the autobuild of 18th May or later, I really would be
> > > grateful if you could PLEASE take a few minutes to try these steps.
> > >
> > > 1) Go to Global Embosser Setup.
> > >
> > > 2) Select "New".
> > >
> > > 3) In the General Tab, where it now says, "(Please select a model)",
> > > scroll down and select "Freedom Scientific Braille Blazer".
> > >
> > > 4) Click on OK. (Which will return you to the main dialog.
> > >
> > > 5) If you happen to have other embossers set up, is the highlight on,
> > > "Freedom Scientific Braille Blazer", or something else? In my case,
> > > focus seems to be always on the SECOND in the list, NOT on the newly
> > > created Device.
> > >
> > > 6) Highlight the new device anyway. Does Form go to "Narrow Width, 10
> > > Inch Long, Braille Paper"?
> > >
> > > 7) Regardless of above, note setting of Lines per page. 10 inch shows
> > > 24 Lines.
> > >
> > > 8) Now look at Top Margin, which should be zero, and enter a figure of
> > > two, and click O.K.
> > >
> > > 9) A warning comes up. Does it say, "Old Format" 2, and "New Format"
> > > zero?
> > >
> > > 10) Click OK to accept, and return to DBT.
> > >
> > > 11) Go back to Global Embosser Setup, select the above embosser, and
> > > tell me what the Top Margin is set to? (Remember, we entered "2"
> > > previously. On my system it comes back as Zero.
> > >
> > > Fine, but we're not finished yet.
> > >
> > > 12) With the above embosser selected, change the form to, "Narrow
> > > Width, 12 inch Long, Braille Paper"
> > >
> > > 13) Note that Lines per page is now 28, and that we have a Top Margin
> > > of Zero.
> > >
> > > 14) Change Top Margin in Lines from Zero again to 2, and press OK.
> > >
> > > 15) Warning comes up. Is it Old Format 2 - New Format 1? Click on
OK.
> > > Dialog closes.
> > >
> > > 16) Back into embosser Setup again and select the same Device. Is
> > > Lines per page still 28, and has Top Margin become 1 (One)? But did
we
> > > not enter 2?
> > >
> > > Now I have done this on two separate downloads, and on two separate
> > > machines and operating systems (XP Home and Pro) and I get the same
> > > results.
> > >
> > > George Bell.
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > This Message has been scanned for viruses by McAfee Groupshield.
> > > * * *
> > > * This message is via list duxhelp at freelists.org.
> > > * To unsubscribe, send a blank message with
> > > * unsubscribe
> > > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> > > * subscribe, unsubscribe, and set vacation mode and other subscription
> > > * options by visiting //www.freelists.org. The list archive
> > > * is also located there.
> > > * Duxbury Systems' web site is http://www.duxburysystems.com
> > > * * *
> >
> > * * *
> > * This message is via list duxhelp at freelists.org.
> > * To unsubscribe, send a blank message with
> > * unsubscribe
> > * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> > * subscribe, unsubscribe, and set vacation mode and other subscription
> > * options by visiting //www.freelists.org. The list archive
> > * is also located there.
> > * Duxbury Systems' web site is http://www.duxburysystems.com
> > * * *
>
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org. The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
>
> * * *
> * This message is via list duxhelp at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org. The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
* * *
* This message is via list duxhelp at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxhelp-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
