Must be some incompatibility between dll versions! Somewhere I should have the source code for the dlls for version 1.5, I have try to check. - Russell Peters ----- Original Message ----- From: "Andrus" <eetasoft@xxxxxxxxx> To: <delphizip@xxxxxxxxxxxxx> Sent: Saturday, September 21, 2002 9:25 PM Subject: [delphizip] Re: Zipping using XP CD-R support fails > > Using this dll file like the previous one from newdll.zip does not pack at > all: > > error 0x000002FF > > File specification "*.dbf" skipped. > > and so for all pattern specifications. > > Finally, a missing or empty zip file error occurs. > > Andrus Moor > > ----- Original Message ----- > From: "Russell Peters" <russellpeters@xxxxxxxxxxx> > To: <delphizip@xxxxxxxxxxxxx> > Sent: Saturday, September 21, 2002 1:14 AM > Subject: [delphizip] Re: Zipping using XP CD-R support fails > > > > > > I too don't know how to convert ZipMaster to an OCX (and no time to look > > into it at the moment). > > You should try the new dll (should be compatible) I just made - it might > > correct the problem (earlier dlls may not handle temporary directories > > properly) > > > > the file is ZipDLL1705.zip > > http://www.users.bigpond.com/russellpeters/Files/ZipDll1705.zip > > - Russell Peters > > > > ----- Original Message ----- > > From: "Andrus" <eetasoft@xxxxxxxxx> > > To: <delphizip@xxxxxxxxxxxxx> > > Sent: Friday, September 20, 2002 5:39 PM > > Subject: [delphizip] Re: Zipping using XP CD-R support fails > > > > > > > > > > Russell Peters, > > > > > > thank you for reply. > > > > > > > Your problem may be the choice of destination for the temporary file > > > (later > > > > versions have a TempDir property) > > > > > > I set always .TempDir to windows temporary directory in my code. So > it > > > seems than the problem is not there. > > > > > > > I know I have made spanned archives on A drive with XP (but only with > > > recent > > > > versions). > > > > > > Backup to drive A: works OK in one of XP desktop computer. If works very > > > slowly to A: Last 20% takes > > > 30 minutes or more. It did not work to A: in one XP HP omnibook notebook > > > which is not avalable for testing now. I own also this type notebook and > > it > > > is possible to insrtall XP to it to try to reproduce this (currenty it > as > > > W2K). However, I'm concentrating to CD-R zipping problem. > > > > > > When I set the property .AddDiskSpan = .t. when zipping to CD-R > disk, > > > the error is a bit different : > > > > > > .FullErrCode : 0x00000000 > > > .ErrCode : 0x00002B01 > > > .Message : Creation of output file failed > > > > > > > What version is your ZipMaster ? > > > > > > I'm using ZipMaster through free ActiveX wrapper (ocx file, no source > > code) > > > available in my website www.eetasoft.ee/zipmaster.htm Zipmaster OCX > > > author, PC Magazine editor wrote that he can give out his source code. > > > Unfortunately, I havent got responses for my latest emails to him. It > was > > > some years ago when Chris was alive. I downloaded zipmaster ocx from > > German > > > PC Magazine web site. Resource hacker was used to change this ocx > messages > > > to english. > > > > > > Its .VersionInfo property returns 1.52 M > > > > > > I cannot use later versions since I don't have Delphi, I don't have > > > knowledge how to use Delphi (I'm a FoxPro programmer) and don't know > how > > to > > > make ocx file from ZipMaster. > > > > > > > Some of the changes I plan to make to ZipDll would probably help > remove > > > this > > > > problem (if destination is CD (or Removable?), ensure internal > temporary > > > > directory is not destination (make it Window - temp) and force make > > > > temporary file. > > > > > > Since I set .TempDir property always so I'm not sure this solves the > > > problem. > > > I tried to use the dll files from newdll.zip . > > > Zip creation causes errors like file not matched *.dbf for all my > > > .FSpecArgs patterns and no zip file is produced. > > > > > > Must I try to use your newest dll files ? > > > Can you remove Easy CD Creator and try XP CD-R support (Easy CD creator > is > > > not required for XP) ? > > > > > > Andrus Moor > > > > > > > ----- Original Message ----- > > > > From: "Andrus" <eetasoft@xxxxxxxxx> > > > > To: <delphizip@xxxxxxxxxxxxx> > > > > Sent: Thursday, September 19, 2002 8:52 PM > > > > Subject: [delphizip] > > > > > > > > > > > > > > > > > > If belive that if I set .AddDiskSpan property to true, then the > > > > zipmaster > > > > > makes temporary file and copies it > > > > > to a CD. > > > > > In this case, the problem does to appear, isn't it ? > > > > > However, If I remember properly, the problem occurs in this case > also. > > > > > I will re-check using .AddDiskSpan to wirte to CD-RW if I can find > a > > XP > > > > > computer. > > > > > > > > > > Also, I have found that the same error occurs if I try to write to > > > floppy > > > > > A: from XP using .AddDiskSpan . > > > > > > > > > > Andrus Moor > > > > > > > > > > ----- Original Message ----- > > > > > From: Russell Peters > > > > > To: delphizip@xxxxxxxxxxxxx > > > > > Sent: Thursday, September 19, 2002 12:21 AM > > > > > Subject: [delphizip] Re: Cannot zip to Cd-RW in XP > > > > > > > > > > > > > > > As writing a zip file requires random access (rewrites early data > > > > structures > > > > > and setting) unless you make temporary and then copy the full file > > > writing > > > > > to cd (successfully) is unlikely though some cd writers will cache > it > > > > before > > > > > writing it. I have plans to make a newer version do it this way. > > > > > I will try to have a look a the wrapper you use to see what can be > > done. > > > > > - Russell Peters > > > > > ----- Original Message ----- > > > > > From: "Andrus" <eetasoft@xxxxxxxxx> > > > > > To: <delphizip@xxxxxxxxxxxxx> > > > > > Sent: Thursday, September 19, 2002 3:00 AM > > > > > Subject: [delphizip] Cannot zip to Cd-RW in XP > > > > > > > > > > > > > > > > > > > > > > I have encountered a big problem using zipmaster in Windows XP to > > Zip > > > to > > > > > RW > > > > > > CD . > > > > > > > > > > > > Zipping to C: disk works OK. Zipping to CD-RW under Windows 98 > using > > > > > Adaptec > > > > > > DirectCD also works OK. > > > > > > > > > > > > If I try to zip into RW CD under Windows XP using XP native CD-RW > > > > support, > > > > > I > > > > > > got the following error: > > > > > > > > > > > > .FullErrCode : 0x000F020F > > > > > > .ErrCode : 0x0000000F > > > > > > .Message : Error creating file. > > > > > > > > > > > > Is it possible to use zipmaster under XP to write toi CD-RW ? Can > > you > > > > > > recommend me a free ActiveX control or standard DLL files which I > > can > > > > use > > > > > to > > > > > > call zipmaster ? > > > > > > > > > > > > I use a free ActiveX wrapper for calling DelZip from FoxPro . So I > > > > cannot > > > > > > use latest DelZip version. > > > > > > > > > > > > My free zipmaster wrapper code is at > > > > > > > > > > > > http://www.eetasoft.ee/zipmaster.htm > > > > > > > > > > > > Andrus > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >