[ddots-l] setting the output in an audio track to play more than one set of outputs
- From: <fioresq1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 15 Apr 2006 20:08:58 -0400
Hi: When I record an audio track, I'd like to have outs 1 and 2 of my delta
66 go right into my powered monitors. I'd like to send outputs 3 and 4 to a
headphone amp. Right now, I can only set a track for one set of outputs
I.e. 3/4 or 1/2. Can I set an additional bus or something to enable all
four outputs to play on the same track? John
John J. Fioravanti, Jr.
FIORAVANTI & KNIGHT
93 East Court Street
Doylestown, PA 18901
(215)348-9133
The information contained in this electronic mail transmission is
intended solely for the addressee(s) named above. If you are not an
addressee, or responsible for delivering this transmission to an
addressee, you have received this transmission in error and you are
strictly prohibited from reading or disclosing it. The information
contained in this transmission is highly confidential and may be subject
to legally enforceable privileges. Unless you are an addressee, or
associated with an addressee for delivery purposes, you may violate
these privileges and subject yourself to liability if you do anything
with this transmission other than immediately contact us by telephone at
(215)348-9133 or by electronic mail at fioresq1@xxxxxxxxxxx and delete this
transmission. Thank you.
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
- » [ddots-l] setting the output in an audio track to play more than one set of outputs
