Cheers for the clarification! ----- Original Message ----- From: "Luis Elorza" <luiselorza@xxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Friday, February 23, 2007 11:28 PM Subject: [ddots-l] Re: problem with cleaning up tracks > you get that message when your project is unable to find the wave data. > that will happen when you rename audio folders. > any way yesterday i was changing a project to another folder and i moved > the audio to another location. when i opened the project the find missing > audio came up and i browsed for it and selected the reference audio > option, and saved it. when i opened the project the audio was there > andeverything but i noticed that when i recorded a new track the audio > would be in the global audio folder a thing that should not happen because > i have the per project audio folder checked. this is very dangerous > because one may think that all the project's audio would be in the same > folder but instead some are in the project audio an other in the global > audio folder. so the safest way to do it is to save the project as a cwb > file then load it again and fill the unpack bundle dialog with the new > information. > > ----- Original Message ----- > From: "Mike Christer" <m-christer@xxxxxxxxxxxxx> > To: <ddots-l@xxxxxxxxxxxxx> > Sent: Friday, February 23, 2007 7:04 AM > Subject: [ddots-l] Re: problem with cleaning up tracks > > >> Sorry Luis? >> >> I don't quite understand, as when I load a project, I very rarely get >> the, "find missing audio" message? >> >> Isn't this something you get when somethings gone a bit wrong with your >> project folders per se? >> >> Cheers >> >> Mike >> >> >> ----- Original Message ----- >> From: "Luis Elorza" <luiselorza@xxxxxxxxx> >> To: <ddots-l@xxxxxxxxxxxxx> >> Sent: Thursday, February 22, 2007 11:34 PM >> Subject: [ddots-l] Re: problem with cleaning up tracks >> >> >>> you can rename the cwp, or the audio folder or isolate the audio from >>> the global audio folder, basically the same way. >>> when you load the project the find missing audio folder pops up there >>> you can tab to the various options. there are three , move audio, copy >>> audio and reference audio, this gives you many possibilities. in the >>> case you mentioned you just browse to the new folder that contains your >>> audio files , with the look in and the folder list view this way you >>> don't have to change the filename in any way, then select the reference >>> audio option and hit ok. finally don't forget to save the project to >>> keep these changes. >>> >>> ----- Original Message ----- >>> From: "Mike Christer" <m-christer@xxxxxxxxxxxxx> >>> To: <ddots-l@xxxxxxxxxxxxx> >>> Sent: Thursday, February 22, 2007 1:47 PM >>> Subject: [ddots-l] Re: problem with cleaning up tracks >>> >>> >>>> Hey Luis! >>>> >>>> How do you change the name of the Audio folder, without the Project >>>> audio being saved in to a completely new folder entitled "Audio"? >>>> >>>> Cheers >>>> >>>> Mike >>>> ----- Original Message ----- >>>> From: "Luis Elorza" <luiselorza@xxxxxxxxx> >>>> To: <ddots-l@xxxxxxxxxxxxx> >>>> Sent: Thursday, February 22, 2007 2:23 AM >>>> Subject: [ddots-l] Re: problem with cleaning up tracks >>>> >>>> >>>>> still you can change it at a later time.and it is an easy task. >>>>> >>>>> ----- Original Message ----- >>>>> From: "Kevin L. Gibbs" <kevjazz@xxxxxxx> >>>>> To: <ddots-l@xxxxxxxxxxxxx> >>>>> Sent: Wednesday, February 21, 2007 6:09 PM >>>>> Subject: [ddots-l] Re: problem with cleaning up tracks >>>>> >>>>> >>>>>> The only problem with storing audio in per project audio folders is >>>>>> that you >>>>>> have to decide what to call the project before you've started the >>>>>> project. >>>>>> Personally, I have a hel of a time doing that. >>>>>> K. >>>>>> >>>>>> -----Original Message----- >>>>>> From: ddots-l-bounce@xxxxxxxxxxxxx >>>>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On >>>>>> Behalf Of Luis Elorza >>>>>> Sent: Wednesday, February 21, 2007 3:46 PM >>>>>> To: ddots-l@xxxxxxxxxxxxx >>>>>> Subject: [ddots-l] Re: problem with cleaning up tracks >>>>>> >>>>>> >>>>>> when you save the project in the bundle format it incorporates only >>>>>> the >>>>>> audio used in the project. this at the same time helps to discard >>>>>> all the >>>>>> out takes the various edits andno longer used material. >>>>>> what i do is to backup the projects in bundle format and delete the >>>>>> whole >>>>>> audio folder. but to do this you have to be sure there is not audio >>>>>> from >>>>>> other projects in that folder. >>>>>> another thing that has proven to be convenient is to have a folder >>>>>> exclusively for each project, you can do that by choosing new from >>>>>> the file >>>>>> menu and filling the dialog be sure to check the store project audio >>>>>> in its >>>>>> >>>>>> own foldercheckbox. >>>>>> >>>>>> ----- Original Message ----- >>>>>> From: "Blind Luck Music" <ross@xxxxxxxxxxxxxxxxxx> >>>>>> To: <ddots-l@xxxxxxxxxxxxx> >>>>>> Sent: Wednesday, February 21, 2007 2:06 PM >>>>>> Subject: [ddots-l] Re: problem with cleaning up tracks >>>>>> >>>>>> >>>>>>> Luis or anyone else, >>>>>>> >>>>>>> I'm having difficulty getting support on the phone from cakewalk >>>>>>> because >>>>>>> they do not support version 4. Luis had mentioned you save your >>>>>>> files in >>>>>>> bundle folders. If I make a bundle file from my most recent saving >>>>>>> of the >>>>>> >>>>>>> project, does that mean that all the other outtakes, which are >>>>>>> numerous, >>>>>>> will not be attached to that.Hence, if I then move them to an >>>>>>> external >>>>>>> disk drive and delete them from the sonar opened dialogue will all >>>>>>> the >>>>>>> tracks and recorded tracks I have recorded be gone from my E drive? >>>>>>> I >>>>>>> hope I stated that clearly enough. Thanks. >>>>>>> >>>>>>> Ross >>>>>>> >>>>>>> ----- Original Message ----- >>>>>>> From: "Luis Elorza" <luiselorza@xxxxxxxxx> >>>>>>> To: <ddots-l@xxxxxxxxxxxxx> >>>>>>> Sent: Monday, February 19, 2007 4:16 PM >>>>>>> Subject: [ddots-l] Re: problem with cleaning up tracks >>>>>>> >>>>>>> >>>>>>>>i really hate that clean up dialog, what i do is to save the files >>>>>>>>in >>>>>>>>bundle format that way i keep only the waves that are used in the >>>>>>>>project.. >>>>>>>> ----- Original Message ----- >>>>>>>> From: "Blind Luck Music" <ross@xxxxxxxxxxxxxxxxxx> >>>>>>>> To: <ddots-l@xxxxxxxxxxxxx> >>>>>>>> Sent: Monday, February 19, 2007 12:54 PM >>>>>>>> Subject: [ddots-l] Re: problem with cleaning up tracks >>>>>>>> >>>>>>>> >>>>>>>>>I tried all the procedures you all suggested and unfortunately, I >>>>>>>>>just >>>>>>>>>get into a loop where when I close the unreadable tracks dialogue, >>>>>>>>>it >>>>>>>>>just goes back to the previous menu and when I select "find", it >>>>>>>>>goes >>>>>>>>>back to the unreadable tracks dialogue. Any other thoughts? >>>>>>>>> >>>>>>>>> Ross >>>>>>>>> >>>>>>>>> Ross Wine-Sky >>>>>>>>> >>>>>>>>> 1708 21st Ave. South #453 >>>>>>>>> >>>>>>>>> Nashville, TN 37212 >>>>>>>>> >>>>>>>>> 615-298-5258 >>>>>>>>> >>>>>>>>> 615-828-9784 cell >>>>>>>>> >>>>>>>>> ross@xxxxxxxxxxxxxxxxxx >>>>>>>>> >>>>>>>>> www.wine-sky.com >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>>>> ** If this link doesn't work then send a message to: >>>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx >>>>>>>>> ** and in the Subject line type >>>>>>>>> ** unsubscribe >>>>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>>>> ** immediately-following link:- >>>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>>>>>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>>>>>>>> Subject:- faq >>>>>>>>> >>>>>>>> >>>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>>> ** If this link doesn't work then send a message to: >>>>>>>> ** ddots-l-request@xxxxxxxxxxxxx >>>>>>>> ** and in the Subject line type >>>>>>>> ** unsubscribe >>>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>>> ** immediately-following link:- >>>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>>>>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>>>>>>> Subject:- faq >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> ** To leave the list, click on the immediately-following link:- >>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>>> ** If this link doesn't work then send a message to: >>>>>>> ** ddots-l-request@xxxxxxxxxxxxx >>>>>>> ** and in the Subject line type >>>>>>> ** unsubscribe >>>>>>> ** For other list commands such as vacation mode, click on the >>>>>>> ** immediately-following link:- >>>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>>>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>>>>>> Subject:- faq >>>>>>> >>>>>> >>>>>> ** To leave the list, click on the immediately-following link:- >>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>> ** If this link doesn't work then send a message to: >>>>>> ** ddots-l-request@xxxxxxxxxxxxx >>>>>> ** and in the Subject line type >>>>>> ** unsubscribe >>>>>> ** For other list commands such as vacation mode, click on the >>>>>> ** immediately-following link:- >>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>>>> ** or send a message, to >>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>> ** To leave the list, click on the immediately-following link:- >>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>>> ** If this link doesn't work then send a message to: >>>>>> ** ddots-l-request@xxxxxxxxxxxxx >>>>>> ** and in the Subject line type >>>>>> ** unsubscribe >>>>>> ** For other list commands such as vacation mode, click on the >>>>>> ** immediately-following link:- >>>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>>>> ** or send a message, to >>>>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq >>>>>> >>>>> >>>>> ** To leave the list, click on the immediately-following link:- >>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>>> ** If this link doesn't work then send a message to: >>>>> ** ddots-l-request@xxxxxxxxxxxxx >>>>> ** and in the Subject line type >>>>> ** unsubscribe >>>>> ** For other list commands such as vacation mode, click on the >>>>> ** immediately-following link:- >>>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>>>> Subject:- faq >>>>> >>>>> >>>>> >>>>> -- >>>>> No virus found in this incoming message. >>>>> Checked by AVG Free Edition. >>>>> Version: 7.5.441 / Virus Database: 268.18.3/694 - Release Date: >>>>> 20/02/2007 13:44 >>>>> >>>>> >>>> >>>> ** To leave the list, click on the immediately-following link:- >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>>> ** If this link doesn't work then send a message to: >>>> ** ddots-l-request@xxxxxxxxxxxxx >>>> ** and in the Subject line type >>>> ** unsubscribe >>>> ** For other list commands such as vacation mode, click on the >>>> ** immediately-following link:- >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>>> Subject:- faq >>>> >>> >>> ** To leave the list, click on the immediately-following link:- >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >>> ** If this link doesn't work then send a message to: >>> ** ddots-l-request@xxxxxxxxxxxxx >>> ** and in the Subject line type >>> ** unsubscribe >>> ** For other list commands such as vacation mode, click on the >>> ** immediately-following link:- >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >>> Subject:- faq >>> >>> >>> >>> -- >>> No virus found in this incoming message. >>> Checked by AVG Free Edition. >>> Version: 7.5.441 / Virus Database: 268.18.3/697 - Release Date: >>> 22/02/2007 11:55 >>> >>> >> >> ** To leave the list, click on the immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >> ** If this link doesn't work then send a message to: >> ** ddots-l-request@xxxxxxxxxxxxx >> ** and in the Subject line type >> ** unsubscribe >> ** For other list commands such as vacation mode, click on the >> ** immediately-following link:- >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the >> Subject:- faq >> > > ** To leave the list, click on the immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > ** If this link doesn't work then send a message to: > ** ddots-l-request@xxxxxxxxxxxxx > ** and in the Subject line type > ** unsubscribe > ** For other list commands such as vacation mode, click on the > ** immediately-following link:- > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the > Subject:- faq > > > > -- > No virus found in this incoming message. > Checked by AVG Free Edition. > Version: 7.5.441 / Virus Database: 268.18.3/699 - Release Date: 23/02/2007 > 13:26 > > ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq