[ddots-l] Re: couple problems

  • From: Sandy Licht <slicht@xxxxxxxxxxxxxx>
  • To: ddots-l@xxxxxxxxxxxxx, ddots-l@xxxxxxxxxxxxx
  • Date: Sat, 18 Nov 2006 19:52:19 -0600

Mine had a conflict with the USB ports. I only had 1 PCIA slot, so I couldn't move the sound card. I ended up getting a new case and motherboard, and having the rest of the hardware that was in my small Shuttle put into the new case. That computer still works great... after a drive reformat, that is.


At 04:02 PM 11/18/2006, Phil Muir wrote:
if the
popping occurs no matter what file you are playing, it certainly
could be an IRQ issue.

Indeed, it's always best to get your audio sound card on it's own IRQ, if possible



Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
----- Original Message -----
From: "Sandy Licht" <slicht@xxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>; <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, November 18, 2006 9:37 PM
Subject: [ddots-l] Re: couple problems


> If the popping and static is only with one file, I don't know what to tell you besides the fact > that it might be corrupt. But if the popping occurs no matter what file you are playing, it > certainly could be an IRQ issue. It was with me. Remember, Gord? We thought we would never find
> the problem.
>
> At 03:29 PM 11/18/2006, Luis Elorza wrote:
>>i had the same problem once, and i was going crazy thinking that the problem was a software
>>problem.
>>i used a motu midi express xt for a long time and i felt that my midi was in time but it was just >>a little bit sloppy even using quantize. i even thoutht that my emu modules were acting like that >>and it started getting worse when i started using newer versions. i had distortion in my audio >>tracks, i had clicks and pops, my midi tracks would go out of sync. then i discovered that the >>audio would play right when i turned off my midi tracks and viceversa. so i changed my midi
>>express for an edirol m-800. and all my problems disappeared.
>>
>>
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.409 / Virus Database: 268.14.7/537 - Release Date: 11/17/2006
>
> Sandy Licht
>
> Jeremiah 29:11 - 14 A   .
> 11 For I know the plans I have for you," says the Lord. "They are plans for good and not for > disaster, to give you a future and a hope. 12 In those days when you pray, I will listen. 13 If > you look for me in earnest, you will find me when you seek me. 14 I will be found by you," says
> the Lord.
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
>


** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq


--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.409 / Virus Database: 268.14.7/537 - Release Date: 11/17/2006

Sandy Licht

Jeremiah 29:11 - 14 A   .
11 For I know the plans I have for you," says the Lord. "They are plans for good and not for disaster, to give you a future and a hope. 12 In those days when you pray, I will listen. 13 If you look for me in earnest, you will find me when you seek me. 14 I will be found by you," says the Lord.

** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq

Other related posts: