[ddots-l] Re: another question about the FW tascam 1884
- From: "neville" <neville@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 15 Nov 2007 13:09:11 -0500
I am using Avast as my virous protection. What do you use?
----- Original Message -----
From: Phil Muir
To: ddots-l@xxxxxxxxxxxxx
Sent: Thursday, November 15, 2007 12:44 PM
Subject: [ddots-l] Re: another question about the FW tascam 1884
Neville, as I told you yesterday, when running WDM drivers, you may need to
alter the slider in the audio options dialog box. Failing that, try switching
to ASIO drivers and go into the FW control panel and move the slider to 50%.
This will give you latency of 5.8MS which should be still good enough for
playing softsynthes. If you still are getting pops and clicks at that setting
then, there are a couple of other things to try.
1: copy some projects that your running on your external drive to the second
internal drive on your system and try running the projects from there. I
suspect that running the audio on an external drive could possibly be the
issue. Or, 2: go into the FW1884 control panel and move the FW slider up to
the next percentage. Also, you shouldn't need to alter IO settings from what
we set them too. Finally, if your running any antivirus such as Norton then,
that will bog your system down quite a bit.
Regards, Phil Muir
P J Muir Productions
Music And Audio Production
URL:
www.philmuir.com/
Band website:
www.steelstringmusic.co.uk/
Band my Space Site:
www.myspace.com/steelstringmusic
Other related posts:
