Check the manufacturer site. They probably have a detailed list with exact chipset models that work. I know for example the T.I. XIO1220 is an iffy one, and is popular on many cards. D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Erik Bryndahl Sent: Thursday, November 07, 2013 3:26 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] SV: Re: How to use Mackie Onyx 1640I Hello D!J!X! Thanks for your advice! How do I check if my firewire chip is compatible with my device? Erik -----Ursprungligt meddelande----- Från: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] För D!J!X! Skickat: den 7 november 2013 17:51 Till: ddots-l@xxxxxxxxxxxxx Ämne: [ddots-l] Re: How to use Mackie Onyx 1640I Is that a firewire unit? If it is, check to be sure that your firewire chip is compatible with it. Don't just say I have texas instruments so all is well, there are still differences even within the texas instruments offerings. This matters more nowadays, since allot of the firewire chipsets are PCI chips made into PCI Express by the addition of a PCI to PCIE bridge; this can cause issues with certain units. If the unit is USB, be sure that you are not running it on a USB3 port, or at least one from a third party like NEC, VIA or others, as those drivers are usually horrible. HTH, D!J!X! -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Erik Bryndahl Sent: Thursday, November 07, 2013 10:04 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] How to use Mackie Onyx 1640I Hello list, I have this audio device at my work a'nd it's up and running. My problem is that I have just a little knowledge about how it works. I know that I can do a lot of things with it for example in recording sessions like direct monitoring but I don't know how to do this. I've been doing some google and also been reading the manual, but I haven't really become more wise after that. Another issue I'm having with this device is pops and tics in my recordings. I have done some testing with different latency values, but never really solved my problem. My system is Windows 7 64 with Sonar 8.5 and CT 8.8. I'm running the device on ASIO drivers. I hope someone with knowledge in this audio device can help me. Regards, Erik Bryndahl PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq