Hi chris! The sound has lost the clearness in the top and got muddy in the bottom. No edges. Hard to express when i am normally not talking about these things in english. I know this is hard to clear up from the distance i just hoped that someone had a rutine in using the Sonar burning system. I will try to get it burned with nero instead. Have seen on this list that others are having good experiences with using that software. Thanks for trying to help me out! Take care! Dennis y -----Oprindelig meddelelse----- Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På vegne af Chris Smart Sendt: 10. august 2011 02:17 Til: ddots-l@xxxxxxxxxxxxx Emne: [ddots-l] Re: Dynamic los when exporting to wave Can you be more specific? Thick blanket suggests that the higher treble is being reduced or filtered somehow, but it's hard to know really what you're describing. MP3 is a lossy format, so in theory, it should be inferior to CD, not the other way around. If you have bit depth and sampling rate options when you burn to CD, make sure they are set to 16 bits and 44.1KHZ. This might be a silly question but are you playing the mp3 version through the same speakers as the physical CD you burned? And, have you tried exporting your mix as a stereo 16-bit 44.1K wav file, and burning it to disc with something other than Sonar's burn feature? Chris At 06:37 PM 8/9/2011, you wrote: > > >Hi List! > >I have solved the level problem thanks to Dave and the Boost 11 >compressor. I am still having problems with dynamic in the sound. >It sounds like there is a thin blanket over the speakers when played on >my cd player. I do not face this problem if i export the same project >to mp3. PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq ----- Ingen virus fundet i denne meddelelse. Kontrolleret af AVG - www.avg.com Version: 10.0.1392 / Virusdatabase: 1520/3823 - Udgivelsesdato: 09-08-2011 PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq