[ddots-l] Re: Retreeving matterial
- From: Doug Daniels <douglasneal@xxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 21 Mar 2011 17:20:47 -0700
Charles, when I double click, I mean push the space bar on the double click
button, the screen goes back to desk top, and I don't get into the control
panel. What should I do? Doug.
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Charles Marston
Sent: Monday, March 21, 2011 12:25 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Retreeving matterial
Doug:
You can press inser plus F11 then arrow down until you get to the ProjectMix
control pannel. You will need to tab until you get to the double left click
button. That should open the ProjectMix control pannel. You will need to
use the JAWS curser to go through the screen. It is not very accessible
because sometimes is hard to know which values go with which setting. See
if you can get some sighted help.
> From: douglasneal@xxxxx
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Retreeving matterial
> Date: Mon, 21 Mar 2011 11:24:45 -0700
>
> Cris, how would I get to the place where I could look at the control
panel.
> And what would I look for, and what should I do there?
> Doug.
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
On
> Behalf Of Chris Smart
> Sent: Sunday, March 20, 2011 9:21 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: Retreeving matterial
>
> Does the Project Mix have control pannel software you might need to
> adjust?
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
Other related posts:
