[ddots-l] Re: Recording terms tips
- From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 13 Nov 2004 18:37:22 -0000
Hi there!!
I haven't heard of a pitch limiter.
Regards, Phil Muir
----- Original Message -----
From: "PRODUCTIONS BEAUSOLEIL" <psoleil@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, November 13, 2004 1:44 PM
Subject: [ddots-l] Re: Recording terms tips
> Hi phil
>
> What's the differance between a cpmpresser and a pitch limiter. I know how
> to apply a compresser in a right way but not a pitch limiter.
>
> Thanks
>
> Richard
> ----- Original Message -----
> From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Saturday, November 13, 2004 7:01 AM
> Subject: [ddots-l] Re: Recording terms tips
>
>
> > HI Rod!!
> >
> > EQ adjusts the tone on a sound. Think of it this way, on your stereo, you
> have controls for
> > adjusting the bass, midrange and treble. That's what you can do with EQ.
> You can use it to filter
> > out specific frequencies for example, if you were recording a Fender
> Rhodes sound, there may be
> > quite a lot of midrange frequencies in that sound. So, you could use the
> EQ to filter out some of
> > them which would help the sound of the Fender Rhodes cut through in the
> mix.
> >
> > Compression is used to boost the overall level of a sound. For example,
> when some vocalists sing,
> > there can be quite a change in the volume level coming on to the track.
> Or, if the singer is
> > singing a song that has quite a large vocal range. Some of the sound
> going down on to the track
> > could be at say, minus 3 or for DB where as other parts of the sound could
> be at minus 0.2 DB. You
> > could then add a compressor which would bring up the volume of the notes
> at minus 3 or 4 DB and
> > compress or push down the volume of the hier notes at minus 0.2 DB thus,
> levelling out the sound on
> > the vocal track.
> >
> > Regards, Phil Muir
> >
> > ----- Original Message -----
> > From: "Rod Alcidonis" <roddj12@xxxxxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Saturday, November 13, 2004 10:51 AM
> > Subject: [ddots-l] Recording terms tips
> >
> >
> > > Hey gangs:
> > > Two questions:
> > >
> > > What is the difference between EQ and compression please? I need to
> start
> > > making my tunes sound a little better. Provide Examples please!!!!
> > >
> > > My other question, when one listen to a song, and hears a little noise
> > > that's not wanted. for example, a phone that rings far in the background
> or
> > > something. This is a bad freqency, I suppose. Now, how do you determine
> > > what DB is that frequency and what and how much frequency to cut or
> filter?
> > > What I am getting at is when someone say, I get rid of the frequency I
> want
> > > and boost the ones I like. How do you get to finding out the frequencies
> you
> > > want and don't want. I am having problem conceptualizing the terms, I
> think.
> > > Thanks!
> > >
> > > Rod
> > > MSN: roddj12@xxxxxxxxxxx
> > > IM: Roddy12RA
> > >
> > > "No power on earth can stop an idea whose time has come." Victor Hugo.
> > >
> > >
> > >
> > > ----- Original Message -----
> > > From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> > > To: <ddots-l@xxxxxxxxxxxxx>
> > > Sent: Saturday, November 13, 2004 2:33 AM
> > > Subject: [ddots-l] Re: converting to MP3 with Sonar
> > >
> > >
> > > > Sonar 4 is now using the lame encoder, which is much better than what
> they
> > > > were using.
> > > > Gord
> > > > ----- Original Message -----
> > > > From: "Brian Kijewski" <sitedblind@xxxxxxxxxxx>
> > > > To: <ddots-l@xxxxxxxxxxxxx>
> > > > Sent: Friday, November 12, 2004 6:57 PM
> > > > Subject: [ddots-l] converting to MP3 with Sonar
> > > >
> > > >
> > > > Hi:
> > > > I only converted a .cwp file in Sonar into an MP3 right when I got
> Sonar,
> > > > and now when I tried to do it again, Jaws says "processing audio data"
> but
> > > > once it's finished doing this, a message box comes up asking me to
> type in
> > > > my unlock code. I have no idea what it is talking about and when I
> press
> > > > escape or click on "continue", nothing else happens and therefore, the
> > > song
> > > > is not converted into an MP3. It seems as if maybe I need to download
> > > > something or as if my trial has run out.
> > > > Does anybody know what I can do so that I am able to convert .cwp
> files
> > > into
> > > > MP3's??????????????
> > > > Thanks a lot!!!!!!
> > > > Brian
> > > >
> > > > _________________________________________________________________
> > > > Take charge with a pop-up guard built on patented Microsoft®
> SmartScreen
> > > > Technology
> > > >
> > >
> http://join.msn.com/?pgmarket=en-ca&page=byoa/prem&xAPID=1994&DI=1034&SU=htt
> > > p://hotmail.com/enca&HL=Market_MSNIS_Taglines
> > > > Start enjoying all the benefits of MSN® Premium right now and get
> the
> > > > first two months FREE*.
> > > >
> > > > ** To leave the list, click on the immediately-following link:-
> > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > > ** If this link doesn't work then send a message to:
> > > > ** ddots-l-request@xxxxxxxxxxxxx
> > > > ** and in the Subject line type
> > > > ** unsubscribe
> > > > ** For other list commands such as vacation mode, click on the
> > > > ** immediately-following link:-
> > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > > > ** or send a message, to
> > > > ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
> > > >
> > > >
> > > > ** To leave the list, click on the immediately-following link:-
> > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > > ** If this link doesn't work then send a message to:
> > > > ** ddots-l-request@xxxxxxxxxxxxx
> > > > ** and in the Subject line type
> > > > ** unsubscribe
> > > > ** For other list commands such as vacation mode, click on the
> > > > ** immediately-following link:-
> > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > > > ** or send a message, to
> > > > ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
> > > >
> > > >
> > > ** To leave the list, click on the immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > > ** If this link doesn't work then send a message to:
> > > ** ddots-l-request@xxxxxxxxxxxxx
> > > ** and in the Subject line type
> > > ** unsubscribe
> > > ** For other list commands such as vacation mode, click on the
> > > ** immediately-following link:-
> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > > ** or send a message, to
> > > ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
> > >
> > >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
> >
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
>
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
