Hello all, I'm having problems playing back my audio in stereo through my Behringer headphone amp. I have two cables with TSR plugs, one quarter inch on the one end and two female connecters on the other end. I plug the two in to the balanced output jacks 1 and 2 on the Tascam FW1884, I've connected a TSR cable to one plug that goes to the back of the amp in one of the input jacks, another cable goes from the other connecter to my monitor, this is duplicated with the other connecter. I did notice that one of the cables going to one of the monitors is TS, not sure what effect that would have on the amp though. I plug the headphones in to the front of the amp, the plugs are TSR also, whenever I go in to play back and try to pan a particular track either nothing happens, or when I pan 100% in one direction I lose the audio all together. Any ideas? Thanks BTW, this is the Behringer Power Play 8.