You have 512mB of RAM. What other specks are you running E.G, how fast is your processor, how many
hard disks do you have exedra?
Regards, Phil Muir P J Muir Productions Music and audio production URL: www.philmuir.com/
Hi , I purchased cakewalk sonar 5 producer edition and caketalking 5.1 lasdt month from dancing dots. I still am having problems. What happens is as ssoon as I hit the space bar it turns jaws off , so I have to open up jaws again.it just happens again and again, therefore I can't write any music yeyt Could it be that I don't have enough memory (I have 512k) thank you for the support Ross
-----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Gordon Kent Sent: Saturday, July 29, 2006 3:56 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Motu 24i /o
Hello:
Yes, I would go with the motu. HAving three deltas could open up a can
of
worms as far as irq's are concerned. You certainly won't have jaws
comming
out of it so there is no special configuration to worry about.
Remember,
cake talking doesn't care what sound card you are using for Sonar. I
did
set p a system for one of our customers using the motu 24 i/o and it
works
fine.
Gord
----- Original Message ----- From: "Jeanette Contant-Galitello" <jeanette@xxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, July 29, 2006 4:42 AM
Subject: [ddots-l] Motu 24i /o
Hi, does anyone have any experience with the Motu 24 i/o? We arethinkingthatof getting it for a 24 channel analog desk. Is there a lot to be configured for it to be accessible with Jaws and Caketalking? I knowone option is buying 3 delta 1010s, but I think the Motu may beslightlythebetter.
Thanks, Jeanette Contant-Galitello
----- Original Message ----- From: "Berhane Kidane" <bkw11@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, July 29, 2006 9:02 AM
Subject: [ddots-l] Re: Default Template In Sonar 5
Hello,
What do I have to do if I want to have 16 midi and 16 audio tracks
whenever
I open new progect.
Thank you
Berhane
----- Original Message ----- From: "Sean A. Cummins" <Sean@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, July 28, 2006 11:52 PM
Subject: [ddots-l] Re: Default Template In Sonar 5
ProducerDear Jay,
Here are a few things you need to know and to do when using CT5 andproject,5. Original Message with answers following each question.
Hey guys,
I just upgraded to Sonar 5/CT5...questions?,
1. I no longer seem to have a default template. If I go to open aall the templates are there, just no default on start up. Is thisway it works now?
Jay, you need to make sure your setting under (option, Global, Audio
tract toData, on startup load normal template) is check.
2. Also, I'm not getting any navigation clicks when moving frometc,track as I did in CT4...still getting the sounds for solo, mute,thethough. Again, normal?
No, this is not normal.. Check your settings using (control+U) forwaynew verbal options menu. Make sure all of your audio settings are thefromtheyshould be for your likings before saving your settings.
If this doesn't work. I would suggest you uninstall any versions of CakeTalking and make sure all of the Sonar script files are deletedback totheUser setting and the shared settings folders as well. Then of cores, reinstall CT5 once again.
3. No wave file "please wait" greeting on startup or when comingtrack.Sonar, just JAWS saying "Welcome back."
Yes, this is true, there is no wave file playing on startup or returning.
4. And the response is very sluggish when moving from track toYou
There is a couple new features that need to be set and understood.secondwillneed to run the color test from the (control+F12) which is theandone down.There are instructions on all of the steps in the installationwhenusers guide, so I won't rehash them here.
After doing the color test. you will always need to use the (F6)inworking with a project. then you will need to use the third optionthe (control+F12) which is for turning off the visual continuous meters.
This will be save on a per project basses.
Take Care,
Sean
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq