[ddots-l] Re: Mixing down audio
- From: <fioresq1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 25 Apr 2006 00:41:33 -0400
Sean are you talking about mastering after you've exported your tracks into
a waive file in sonar. If so, what do you use, soundforge? JOhn Fioravanti
----- Original Message -----
From: "Shawn Brock" <shawnbrock@xxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, April 25, 2006 12:21 AM
Subject: [ddots-l] Re: Mixing down audio
hello, i find that it is better to mix, at lower levels and bump every thing
up durring mastering. with the unrelyable meaders in sonar so i know i'm
not clipping. there are lots of plug ins to bump the volume up durring
mastering and you dont hav to worry about a track clipping.
Shawn Brock
Cincinnati Sound Lab
130 East Sixth Street
Cincinnati Oh.
45202
Phone: 513-349-8541
Web Site:
www.cincysoundlab.com
----- Original Message -----
From: Gordon Kent
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, April 24, 2006 4:04 PM
Subject: [ddots-l] Re: Mixing down audio
This is happening because some of your tracks that are feeding your master
are too high. Always keep in mind that peak levels are cumulative. When
you start stacking up a lot of tracks, even though individually their levels
might be all right, together they will mount up. Many times I find myself
going through all my audio tracks and just dropping each one down by around
5 db or so. The name of the game when mixing is head room, it will go a
long way toward giving your mixes the space they need.
Gord
----- Original Message -----
From: Sean Farrow
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, April 24, 2006 3:14 PM
Subject: [ddots-l] Mixing down audio
Hi:
I need to mix down audio that is going to the master buss, the master
bus is set at a output level of -6.0 Db. When I mix the audio down, the
audio level comes out at -0.2 Db. Why is this? Can somebody tell me how to
mix the audio down keeping the output level the same.
I am using sonar 4 producer.
Cheers
Sean.
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
