[ddots-l] Re: Behringer BCF2000 selecting midi ports
- From: "Steve Spamer" <steve@xxxxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sun, 25 Nov 2012 11:26:47 -0000
Hi Tim and thanks. Well I'll go and get the surface reader today and see
how things pan out. Rui's instructions have really cleared things up for
me, cheers Steve.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Tim Martin
Sent: 25 November 2012 03:47
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Behringer BCF2000 selecting midi ports
Great job again, Rui!
Steve, do you have a virtual midi port program, like Surface Reader; or MDR?
I think MDR works with 32 bit, and I know for sure that Surface Reader works
good with 64 bit.
I don't think there would be a problem running 32 bit Sonar on a 64 bit
machine, I just wouldn't know which virtual midi port program would work the
best.
I'm sure someone else may have a little more knowledge as to which one you
would need.
Have a great one!.
Tim
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Rui Vilarinho
Sent: Saturday, November 24, 2012 7:46 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Behringer BCF2000 selecting midi ports
> Hi Steve,
> If you are using the BCF 2000 without the surface reader:
> Go to Sonar options midi devices and select the BCF2000 1 as input and
> the same BCF2000 1 midi port as output.
> Go to Sonar options surface controls and make a new Mackie control
> preset with those midi ports selected.
> Remenber to go to Sonar tools, Mackie control and make the recommended
> adjustments.
>
> Now! regarding using the BCF 2000 with speach?
> This is where things get really cool.
> Will need 4 things working together:
>
> 2 Virtual midi ports enable,
> BCF2000 plug and turn on,
> Surface reader on,
> And Sonar on.
>
> Well, with 2 virtual midi ports ready.
> Go to Sonar and disable the BCF 2000 midi device input and output and
> select the Virtual midi port 1 as input and the virtual midi port 2 as
> output.
>
> Than go to the surface reader and make the folowing settings:
> hardware properties:
> input BCF2000 1, output virtual midi port 1.
>
>
>
> Display properties:
>
> input virtual midi port 2, output BCF2000 1.
>
>
>
> BCF2000talks! so cool!
>
>
>
> regards,
>
> Rui Vilarinho
>
>
>
> ----- Original Message -----
> From: "Steve S" <steve@xxxxxxxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Saturday, November 24, 2012 6:28 PM
> Subject: [ddots-l] Behringer BCF2000 selecting midi ports
>
>
>> Hi folks. I'm setting up my new Behringer BCF2000 and have a question
>> on what midi ports to choose. I selected all the available BCF
>> inputs and outputs in the midi devices options, then went to
>> controllers/control surfaces to select mackie control. When moving
>> to the list to choose the midi input and output, I have 2 BCF midi
>> ports and 3 BCF output ports, which ones do I need to select? Any
>> help would be greatly appreciated, cheers Steve.
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the
> immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
