[ddots-l] Re: 828mk3
- From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 16 Oct 2008 09:16:08 +0100
Hi,
See my post to Omar a couple of minutes before this one.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Mike C
Sent: 16 October 2008 05:41
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: 828mk3
Hi Tim have you had success in accessing the new cue mix console.
Since I have 8pre when I launch the new cue mix console I can't do anything
with the Jaws cursor. Have you developed hot spot clicker to work with the
new cue mix console?
----- Original Message -----
From: "Doctor cc" <clrcar@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Wednesday, October 15, 2008 2:19 PM
Subject: [ddots-l] Re: 828mk3
> Hi Tim Burgess,
> My motu 828mk3 is fire wire. If the usb and fire wire operate the
> same, How did you set the Q mix so that the keyboard can be heard when
> you play it? As always I thank you for information you can share.
> ----- Original Message -----
> From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Saturday, August 02, 2008 5:51 AM
> Subject: [ddots-l] Re: 828mk3
>
>
>> Hi,
>>
>> Using the USB2 version of that interface here for mobile recording
>> and it's a breeze.
>>
>>
>> Best wishes.
>>
>> Tim Burgess
>> Raised Bar Ltd
>> Phone: +44 (0)1827 719822
>>
>> Don't forget to vote for improved access to music and music technology at
>>
>> http://www.raisedbar.net/petition.htm
>>
>> -----Original Message-----
>> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>> On
>> Behalf Of Doctor cc
>> Sent: 02 August 2008 02:50
>> To: ddots-l@xxxxxxxxxxxxx
>> Subject: [ddots-l] 828mk3
>>
>> Hello Every one,
>> I would like to know if we can use the motu 828mk3 with any degree of
>> success?
>> I am referring to setting it up and accessing the parameters. I thank you
>> very much.
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the immediately
>> following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode, click on the immediately
> following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
