[ddots-l] Re: 828mk3

Hi Tim, and everyone else interested in the Motu cards. I was on the phone with 
their tech support yesterday, and they were curteous enough to assist me with 
setting up my cuemix the way i want. The guy I spoke to was familiar with jaws, 
and even said himself that their new interface will not work with it. I asked 
him if they were working on anything that might help resolve the issue, and he 
suggested writing into tech support via email. I don't know if anyone has done 
this and how responsive/attentive they've found Motu to be to our situation, 
but perhaps we could all email them regarding the issue?

Omar Binno

AIM: LOD1116
Skype: obinno1
Website: www.omarbinno.com
  ----- Original Message ----- 
  From: Tim Burgess 
  To: ddots-l@xxxxxxxxxxxxx 
  Sent: Wednesday, November 05, 2008 6:05 AM
  Subject: [ddots-l] Re: 828mk3


  Hi,

  I know it's been a long time since you posted this, but I've been doing some
  digging with another user and we've pinned down the following:

  1 - The Mk3 versions of MOTU's fire wire and USB interfaces use a new
  version of Cue Mix that does not work with the HSC/script combination I
  developed for my PCI 424 and USB 828 Mk2 interfaces.  The new application
  had to be written because the new interfaces have on-board DSP functions
  that could not be supported using the previous Cue Mix;

  2 - I'm unable to modify my HSC/script set to support the new interfaces, as
  the new Cue Mix is not backwardly-compatible and will not work with my 828
  Mk2.  Similarly, I can't afford to buy a Mk3 interface in order to do this
  work;

  3 - If I come across a client with a Mk3 interface at any point in the
  future I'll investigate what can be done with the new Cue Mix, but I can't
  promise anything - sorry. 

  Best wishes.

  Tim Burgess
  Raised Bar Ltd
  Phone:  +44 (0)1827 719822

  Don't forget to vote for improved access to music and music technology at

  http://www.raisedbar.net/petition.htm
   
  -----Original Message-----
  From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
  Behalf Of Doctor cc
  Sent: 15 October 2008 19:20
  To: ddots-l@xxxxxxxxxxxxx
  Subject: [ddots-l] Re: 828mk3

  Hi Tim Burgess,
  My motu 828mk3 is fire wire. If the usb and fire wire operate the same, How
  did you set the Q mix so that the keyboard can be heard when you play it? As
  always I thank you for information you can share.
  ----- Original Message -----
  From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
  To: <ddots-l@xxxxxxxxxxxxx>
  Sent: Saturday, August 02, 2008 5:51 AM
  Subject: [ddots-l] Re: 828mk3


  > Hi,
  >
  > Using the USB2 version of that interface here for mobile recording and 
  > it's a breeze.
  >
  >
  > Best wishes.
  >
  > Tim Burgess
  > Raised Bar Ltd
  > Phone:  +44 (0)1827 719822
  >
  > Don't forget to vote for improved access to music and music technology at
  >
  > http://www.raisedbar.net/petition.htm
  >
  > -----Original Message-----
  > From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] 
  > On
  > Behalf Of Doctor cc
  > Sent: 02 August 2008 02:50
  > To: ddots-l@xxxxxxxxxxxxx
  > Subject: [ddots-l] 828mk3
  >
  > Hello Every one,
  > I would like to know if we can use the motu 828mk3 with any degree of
  > success?
  > I am referring to setting it up and accessing the parameters. I thank you
  > very much.
  >
  > PLEASE READ THIS FOOTER AT LEAST ONCE!
  > To leave the list, click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
  > If this link doesn't work then send a message to:
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > unsubscribe
  > For other list commands such as vacation mode, click on the immediately
  > following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
  > ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
  >
  >
  > PLEASE READ THIS FOOTER AT LEAST ONCE!
  > To leave the list, click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
  > If this link doesn't work then send a message to:
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > unsubscribe
  > For other list commands such as vacation mode,
  > click on the immediately following link:
  > ddots-l-request@xxxxxxxxxxxxx?subject=faq or
  > send a message, to
  > ddots-l-request@xxxxxxxxxxxxx
  > and in the Subject line type
  > faq
  > 

  PLEASE READ THIS FOOTER AT LEAST ONCE!
  To leave the list, click on the immediately following link:
  ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
  If this link doesn't work then send a message to:
  ddots-l-request@xxxxxxxxxxxxx
  and in the Subject line type
  unsubscribe
  For other list commands such as vacation mode, 
  click on the immediately following link:
  ddots-l-request@xxxxxxxxxxxxx?subject=faq or
  send a message, to 
  ddots-l-request@xxxxxxxxxxxxx
  and in the Subject line type
  faq


  PLEASE READ THIS FOOTER AT LEAST ONCE!
  To leave the list, click on the immediately following link:
  ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
  If this link doesn't work then send a message to:
  ddots-l-request@xxxxxxxxxxxxx
  and in the Subject line type
  unsubscribe
  For other list commands such as vacation mode, 
  click on the immediately following link:
  ddots-l-request@xxxxxxxxxxxxx?subject=faq or
  send a message, to 
  ddots-l-request@xxxxxxxxxxxxx
  and in the Subject line type
  faq

Other related posts: