[softwarelist] Re: Frame overlap type 5 crashes

In message <4e99690dd7john@xxxxxxxxxxxxxxxx>, John Harrison <john@xxxxxxxxxxxxxxxx> writes 
But you snipped the key bit of my message:
" ... including some when frames with 0mm radius corners overlap those
with 5mm radius corners, which never caused a problem before."
Well of course without seeing the actual document I am guessing. But there is a general problem with overlapping frames. Usually a minute change will stop things going wrong. 


--
David Pilling
email: david@xxxxxxxxxxxxxxxxxxx
  web: http://www.davidpilling.net
 post: David Pilling P.O. Box 22 Thornton Cleveleys Blackpool. FY5 1LR UK
  fax: +44(0)870-0520-941

Other related posts: