Thanks Michael. -----Original Message----- From: brailleblaster-bounce@xxxxxxxxxxxxx [mailto:brailleblaster-bounce@xxxxxxxxxxxxx] On Behalf Of Michael Whapples Sent: Wednesday, September 18, 2013 6:57 PM To: brailleblaster@xxxxxxxxxxxxx Subject: [brailleblaster] Repositories Hello, You will have seen two commit messages recently. These relate to me switching what is the default repository. * brailleblaster.newdesign has been copied to the default repository. * The original default repository has been copied to brailleblaster.old. So if you wish to use the old version of BrailleBlaster (not recommended) use the repository at http://code.google.com/p/brailleblaster.old If you want to use the newer version then use the repository at http://code.google.com/p/brailleblaster For those who have existing clones on their system you may push or pull by specifying the appropriate URL, eg. if pulling the new code then please use: hg pull http://code.google.com/p/brailleblaster Similar when pushing: hg push https://code.google.com/p/brailleblaster You need not create a new clone to not need to type these URLs, but you will need to edit a configuration file. Here is how to change your clone of brailleblaster.newdesign to commit to the default repository: * In your clone open the file: .hg/hgrc in a text editor (notepad will do). * The configuration file is in the .ini type format. Fine the paths section, it should be a line with just [paths] on it. * In the [paths] section you should find a line beginning with default = * Change the URL on the default line to reflect the default repository URL: default = https://code.google.com/p/brailleblaster NOTE: you can add your username in the URL so you need not give it: default = https://<username>@code.google.com/p/brailleblaster where <username> is your google username. I plan to remove the newdesign repository soon so that there cannot be accidental use of the wrong repository. Michael Whapples