[bookport] Re: Suggestion for Settings Menu in BP
- From: "Doc" <talmidim@xxxxxxxxxxxxxxxxxx>
- To: <bookport@xxxxxxxxxxxxx>
- Date: Mon, 14 Aug 2006 15:59:59 -0600
To add to this, is it possible that each catagory in settings be given a
number so the user could press for example, 5 and go immediately to voice
or press 1 and go to time?
******************************
Some people are only alive because it is illegal to kill
robert Doc Wright
http://www.wrightplaceinc.net
msn
godfearer15@xxxxxxxxxxx
----- Original Message -----
From: "Peter Torpey" <ptorpey@xxxxxxxxxxxxxxxx>
To: <bookport@xxxxxxxxxxxxx>
Sent: Monday, August 14, 2006 2:29 PM
Subject: [bookport] Suggestion for Settings Menu in BP
When installing new firmware, after a lock-up, or sometimes after installing
new batteries, it is necessary to re-enter the user settings on the BP.
By default, I believe that the "sensitivity" and "sleep timer" settings are
set to the maximum. I usually put the sensitivity to 5 and the sleep timer
to 0. Although it isn't such a big deal, this involves many key presses.
If it's easy (and possible), I think it would be nice to have the 4 and 6
keys bring one to the minimum or maximum allowable values for each of these
settings when held down for one beep (similar to holding down the D and F
keys for one beep to quickly get to the minimum and maximum volume
settings).
Also, it would be nice if the values for some of the other settings (such as
"voice pitch") were spoken as one changed these up and down. Currently, the
BP only beeps as the values for these settings are changed.
-- Pete
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.10.10/418 - Release Date: 8/14/2006
Other related posts:
