Yes. But what good is d e f if your battery goes dead<grin>? I sure wish we could set this from the transfer tool. At 10/21/2004, you wrote: >Pete: > >Pressing D+E+F does preserve the current time/date. > > >>> ptorpey@xxxxxxxxxxxxxxxx 10/21/04 03:53PM >>> >Here are two suggestions for preserving the time/date, in addition to >the other settings which can be preserved as Dale points out below: > >1. The BP Transfer software itself could grab the time/date from >the computer upon connection. I vaguely remember APH staff saying that >the hardware did not support this, but I'm not sure. > >2. If pressing the D-E-F key combination also saved the current >time/date and the user quickly changed batteries, the time/date would be >very nearly correct. I wouldn't mind losing 15 seconds or so - One >wouldn't even notice this since the clock is only accurate to the >nearest minute, and most people usually replace the batteries within a >day/month/year! > >-- Pete > >From: "Dale Laser" <drlieser@xxxxxxx> >Subject: [Bookport] Saving BP Settings >Date: Wed, 20 Oct 2004 20:46:00 -0500 > >The d-e-f command saves the voice settings. Obviously, keeping the time=20 >rolling would require power, so that is not maintained. > >Dale