[blindreplay] Re: Replay Requirements

  • From: <petrakigianos-giasou@xxxxxxxxx>
  • To: blindreplay@xxxxxxxxxxxxx
  • Date: Wed, 27 Jun 2007 19:09:37 -0700 (PDT)

When you see "connecting" in the listview box after the
show/station name for say longer than 45 seconds then the stream
capture method will not work most of the time. My experience. I
use the audio output method for such situations or find an
alternate stream. The ones offered through the Replay Media
Guide work well.

--- Gary Petraccaro <garyp130@xxxxxxxxxxx> wrote:

> It happens on different stations, but not constantly or
> predictably as far as I can tell.  I did try starting the
> programs a minute later so as to give the ones just ending
> time to close.  I'll try other stations,too.
> Thanks.
> 
>   ----- Original Message ----- 
>   From: Kelly Pierce 
>   To: blindreplay@xxxxxxxxxxxxx 
>   Sent: Tuesday, June 26, 2007 7:56 AM
>   Subject: [blindreplay] Re: Replay Requirements
> 
> 
>   Have you tried recording other things at different times on
> the problem station to see if the station is flaky or it is an
> issue with dual recording?  Also, is this program broadcast on
> a different station so you could try that one too?  
> 
>   Kelly 
> 
> 
>     ----- Original Message ----- 
>     From: Gary Petraccaro 
>     To: blindreplay@xxxxxxxxxxxxx 
>     Sent: Monday, June 25, 2007 3:12 PM
>     Subject: [blindreplay] Replay Requirements
> 
> 
>     I'm trying to use Replay AV 8.2 on a P3, 1000GHz, 1 gig of
> RAM.  I want to download or record two radio programs which
> run at the same time.  Fairly often I get one program fine but
> not the other which sometimes says "connecting" a lot, or
> which somes just has an .M3U file, but no other files which
> play when I hit enter on the M3U file.  I don't try to play
> the files until the program is over.  The connection is DSL,
> there's 29 gig of drive space, and I'm not using the system
> for anything else.
>     Suggestions welcomed.
> 
>       ----- Original Message ----- 
>       From: petrakigianos-giasou@xxxxxxxxx 
>       To: blindreplay@xxxxxxxxxxxxx 
>       Sent: Monday, June 25, 2007 10:13 AM
>       Subject: [blindreplay] Re: Replay AV 8.21 & Output tab
> 
> 
>       Hi Rick
>       Thank you. I have listened to all of Rick Harmon's Vista
>       podcasts. Plus the one's Joseph Lee has done. 
> 
>       I know you are a user of Windows Media Center. Any
> chance you
>       can do a few podcasts on media center in the future? I
> can put
>       these on my ftp server.
> 
>       Thank you for telling me this. Others should find these
> links
>       helpful too.
> 
>       Petro
>            
>       --- Rick Alfaro <rick.alfaro@xxxxxxxxx> wrote:
> 
>       > Petro,
>       > 
>       > FYI, you can find some very good tutorial podcasts on
> Vista if
>       > you go to
>       > www.blindcooltech.com.  In addition, there are some
> others on
>       > rick Harmon's
>       > web site http://www.blind-geek-zone.net/
>       > 
>       > --Warmest regards,
>       > 
>       > --Rick Alfaro
>       > --rick.alfaro@xxxxxxxxx
>       > 
>       > 
>       > -----Original Message-----
>       > From: blindreplay-bounce@xxxxxxxxxxxxx
>       > [mailto:blindreplay-bounce@xxxxxxxxxxxxx] On Behalf Of
>       > petrakigianos-giasou@xxxxxxxxx
>       > Sent: Sunday, June 24, 2007 12:21 PM
>       > To: blindreplay@xxxxxxxxxxxxx
>       > Subject: [blindreplay] Re: Replay AV 8.21 & Output tab
>       > 
>       > Hi Kelly
>       > Thank you. I will see if I see the add additional
> users button
>       > within the output tab within RAV. YSI offers 4
> different
>       > accounts. I read what they offer on their website too.
> The
>       > limits.
>       > 
>       > I would use the 16 kbps .mp3 format - just my opinion
> as I do
>       > not collect anything I record.
>       > 
>       > I am using a new notebook computer to write this
> message. I am
>       > using Vista Home Premium and Jaws 8 beta 2 right now.
>       > 
>       > By the end of the year I will put Replay AV on it. I
> have alot
>       > of learning to do with this new OS.       
>       > 
>       > 
>       > --- Kelly Pierce <kellytalk@xxxxxxxxx> wrote:
>       > 
>       > > Petro,
>       > > 
>       > > there is a button below the edit box for additional
> options.
>       > 
>       > > When this is 
>       > > selected, a dialogue appears giving the user the
> ability to
>       > > add multiple 
>       > > e-mail addresses.  realize of course that with the
> You Send
>       > It
>       > >  free 
>       > > account, there is only one gigabyte each month of
>       > downloading
>       > > available. 
>       > > this translates into about 37 downloads of an hour
> long show
>       > > saved in MP3 
>       > > recorded at 64 kbps.  At 32 KBPS it's between 70 and
> 85
>       > > downloads, 
>       > > depending on the show.  For example, shows on
> commercial
>       > radio
>       > > start about 
>       > > six minutes after the hour and end two to three
> minutes
>       > before
>       > > the hour. 
>       > > Starting and ending the recording to take into
> account this
>       > > scheduling will 
>       > > result in smaller file sizes.
>       > > 
>       > > This is all to say that with the You Send It free
> service,
>       > the
>       > > number of 
>       > > actual downloads is small enough that only a few
> people can
>       > > download a 
>       > > frequently recurring show, if that.
>       > > 
>       > > Kelly
>       > > 
>       > > ----- Original Message ----- 
>       > > From: <petrakigianos-giasou@xxxxxxxxx>
>       > > To: <blindreplay@xxxxxxxxxxxxx>
>       > > Sent: Saturday, June 23, 2007 11:46 AM
>       > > Subject: [blindreplay] Replay AV 8.21 & Output tab
>       > > 
>       > > 
>       > > > In RAV 8.21 Output tab properties are any of you
> able to
>       > add
>       > > > more than 1 email address in the edit box? If so,
> how?
>       > > >
>       > > > I will check again the above.
>       > > >
>       > > > If I were to sign up to a YouSendIt PLUS account
> will the
>       > > RAV
>       > > > Output tab properties Email edit box change to
> allow me to
>       > > send
>       > > > to multiple recipients?
>       > > >
>       > > > Petro
>       > > > --
>       > > > To unsubscribe: e-mail
> blindreplay-request@xxxxxxxxxxxxx
>       > > with unsubscribe 
>       > > > in subject
>       > > > To contact list owner: e-mail
>       > > blindreplay-admins@xxxxxxxxxxxxx 
>       > > 
>       > > --
>       > > To unsubscribe: e-mail
> blindreplay-request@xxxxxxxxxxxxx
>       > with
>       > > unsubscribe in subject
>       > > To contact list owner: e-mail
>       > blindreplay-admins@xxxxxxxxxxxxx
>       > > 
>       > 
>       > --
>       > To unsubscribe: e-mail
> blindreplay-request@xxxxxxxxxxxxx with
>       > unsubscribe in
>       > subject
>       > To contact list owner: e-mail
> blindreplay-admins@xxxxxxxxxxxxx
>       > 
>       > --
>       > To unsubscribe: e-mail
> blindreplay-request@xxxxxxxxxxxxx with
>       > unsubscribe in subject
>       > To contact list owner: e-mail
> blindreplay-admins@xxxxxxxxxxxxx
>       > 
> 
>       --
>       To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx
> with unsubscribe in subject
>       To contact list owner: e-mail
> blindreplay-admins@xxxxxxxxxxxxx
> 
> 
>       -- 
>       No virus found in this incoming message.
>       Checked by AVG Free Edition. 
>       Version: 7.5.476 / Virus Database: 269.9.7/868 - Release
> Date: 6/25/2007 12:20 PM
> 
> 
> 
>
------------------------------------------------------------------------------
> 
> 
>   No virus found in this incoming message.
>   Checked by AVG Free Edition. 
>   Version: 7.5.476 / Virus Database: 269.9.9/870 - Release
> Date: 6/26/2007 10:07 AM
> 

--
To unsubscribe: e-mail blindreplay-request@xxxxxxxxxxxxx with unsubscribe in 
subject
To contact list owner: e-mail blindreplay-admins@xxxxxxxxxxxxx

Other related posts: