Hey Jim, thanks. This worked like a charm! Best, Donna From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Homme, James Sent: Wednesday, August 12, 2009 4:03 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] Re: converting tables to text in Word 2007 Hi, You might get lucky. Try Alt, J, L, V with your cursor inside the table. If you want to find all the table layout options, put your cursor inside the table and hit the Alt key by itself, then go left until you hear either layout or design. Then, use Tab or Shift+Tab to explore. For any Word 2007 command, here are two tips. First, if you want to see easily the key strokes to make it work and you have JAWS, when you get your cursor on the right control, hit Insert+F1. That will bring the information up into the virtual buffer where you can read it like a little document. Use Escape to dismiss the buffer. Secondly, for commands you use a lot, you can hit Shift+F10 once you find the button and put it on the Quick Access toolbar with a press of the Enter key. To remove commands from the Quick Access Toolbar, you can find the Quick Access Toolbar with Alt+H, Up Arrow. Then, you can move left and right with arrow keys. To remove things from this toolbar, hit Shift+F10, then press Enter on the Remove choice. Thanks. Jim ---------- Jim Homme Usability Services 412-544-1810 james.homme@xxxxxxxxxxxx "Strength does not come from physical capacity. It comes from an indomitable will." -- Mahatma Gandhi From: bksvol-discuss-bounce@xxxxxxxxxxxxx [mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Donna Goodin Sent: Wednesday, August 12, 2009 2:52 PM To: bksvol-discuss@xxxxxxxxxxxxx Subject: [bksvol-discuss] converting tables to text in Word 2007 Hi all, Well, unfortunately, I wasn't silly after all. Anyone know how to convert a table to text in Word 2007? It's apparently not the same as in Word 2003. TIA, Donna _____ This e-mail and any attachments to it are confidential and are intended solely for use of the individual or entity to whom they are addressed. If you have received this e-mail in error, please notify the sender immediately and then delete it. If you are not the intended recipient, you must not keep, use, disclose, copy or distribute this e-mail without the author's prior permission. The views expressed in this e-mail message do not necessarily represent the views of Highmark Inc., its subsidiaries, or affiliates. No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.392 / Virus Database: 270.13.50/2296 - Release Date: 08/12/09 06:09:00