[argyllcms] i1 Display Pro on OS X - ccxxmake says new_disprd failed with 'Instrument Access Failed'
- From: Symphony Photography <symphonyphoto@xxxxxxxxx>
- To: argyllcms <argyllcms@xxxxxxxxxxxxx>
- Date: Thu, 15 Sep 2011 14:02:28 -0400
(I apologize if this is a repost... sent yesterday but didn't seem to get
through, noticed the servers weren't responding
Hi, I bought an i1D3 after I heard Argyll was now supporting it. :-) Just
having a little trouble getting things going with ccxxmake (dispcal and
dispread seem to work fine). I started with ccxxmake...
ccxxmake -yl -S -F -H -V -d1 -D -s11 -IHPLP3065 HPLP3065_correction.ccss
I then started measuring with the i1D3. Here's what the diagnostics say:
usb_get_paths about to look through devices:
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x765, PID 0x5020
usb_check_and_add() found known instrument
usb_check_and_add() called with VID 0x971, PID 0x2000
usb_check_and_add() found known instrument
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x5ac, PID 0x8005
usb_check_and_add() called with VID 0x5ac, PID 0x8006
usb_check_and_add() called with VID 0x50d, PID 0x234
usb_check_and_add() called with VID 0x46d, PID 0xc404
usb_check_and_add() called with VID 0x5ac, PID 0x1006
usb_check_and_add() called with VID 0x5ac, PID 0x220
usb_check_and_add() called with VID 0x3310, PID 0xe000
i1d3: About to init coms
i1d3: About to init HID
icoms: About to set hid port characteristics
icoms: About to open the USB port
icoms: HID port needs opening
icoms: About to open HID port 'usb:/bus29/dev2/ (Xrite i1 DisplayPro,
ColorMunki Display)'
icoms: HID port is now open
icoms: hid port characteristics set ok
icoms: About to return hid read 0 bytes, ICOM err 0x2000
i1d3: Sending cmd 'GetStatus' args '00 01 00 00 00 00 00 00' ICOM err 0x0
i1d3: Reading response '00 00 00 07 00 00 00 00' ICOM err 0x0
i1d3: checkstats got OK
i1d3: init coms has suceeded
i1d3: About to init instrument
i1d3: Sending cmd 'GetStatus' args '00 01 00 00 00 00 00 00' ICOM err 0x0
i1d3: Reading response '00 00 00 07 00 00 00 00' ICOM err 0x0
i1d3: checkstats got OK
i1d3: Sending cmd 'GetProductName' args '00 10 00 00 00 00 00 00' ICOM err
0x0
i1d3: Reading response '00 00 69 31 44 69 73 70' ICOM err 0x0
i1d3: get prodname got 'i1Display3 '
i1d3: Sending cmd 'GetProductType' args '00 11 00 00 00 00 00 00' ICOM err
0x0
i1d3: Reading response '00 00 00 01 00 00 00 00' ICOM err 0x0
i1d3: get_prodtype got 0x1
i1d3: Sending cmd 'GetFirmwareVersion' args '00 12 00 00 00 00 00 00' ICOM
err 0x0
i1d3: Reading response '00 00 76 31 2e 30 31 20' ICOM err 0x0
i1d3: get firmver got 'v1.01 '
i1d3: Sending cmd 'GetFirmwareDate' args '00 13 00 00 00 00 00 00' ICOM err
0x0
i1d3: Reading response '00 00 31 32 41 70 72 31' ICOM err 0x0
i1d3: get firmdate got '12Apr11'
i1d3: Sending cmd 'GetLockedStatus' args '00 20 00 00 00 00 00 00' ICOM err
0x0
i1d3: Reading response '00 00 00 00 04 00 00 00' ICOM err 0x0
i1d3: lock_status got Unlocked
i1d3: instrument inited OK
i1d3: Sending cmd 'SetLED' args '21 01 05 01 02 00 00 00' ICOM err 0x0
i1d3: Reading response '00 21 00 00 00 00 00 00' ICOM err 0x0
col_cal_spec_set returned 'Internal software error' (Creating spectral to
CIE converted failed)
new_disprd failed because config_inst_displ failed
icoms: delete called
icoms: closing port
hid_close_port() called
hid port has been released and closed
ccxxmake: Error - new_disprd failed with 'Instrument Access Failed'
I noticed xxrd is running. Would that interfere? I usually run with a
regular user account... can't kill the process form that account though.
Cheers, Joe
--
Symphony Photography
http://www.symphonyphoto.com
Other related posts:
