[argyllcms] Re: dispwin: error when istalling profile
- From: Graeme Gill <graeme@xxxxxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Wed, 27 May 2009 11:49:50 +1000
William Dutcher wrote:
Hi Graeme. Thanks for looking at this. The verbose/debug output of dispwin
and xrandr follows. - William
Failed to get EDID for display
That's a bit of a hint. Normally the EDID should be a property
of each output.
% xrandr --verbose
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 1280 x 1280
DFP2 connected 1280x1024+0+0 (0x8d) normal (normal left inverted right x axis y
axis) 376mm x 301mm
Identifier: 0x89
Timestamp: 891369
Subpixel: unknown
Clones:
CRTC: 0
CRTCs: 0 1
Panning: 0x0+0+0
Tracking: 0x0+0+0
Border: 0/0/0/0
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
And there are no other properties listed here, which is a bit suspicious.
It's hard to know from this though whether it's a bug or limitation in the
X server/display driver, a change in the XRANDR protocol that trips up
dispwin, or what.
What does
xrandr --version
report ?
What graphics card is it, and what card driver and version of the X server is
it ?
cheers,
Graeme Gill.
Other related posts:
