Le lundi 19 août 2013 à 14:23 +1000, Graeme Gill a écrit : > chartread -D3 charname 2> log.txt > > Graeme Gill. > > Hello, I'm running Argyll on Gnu/Linux Debian Testing (Jessie). Package: argyll Version: 1.5.1-3 -- man-d
usb_check_and_add: found known instrument VID 0x971, PID 0x2007 munki_init_coms: called munki_init_coms: about to init USB usb_open_port: open port 'usb:/bus0/dev3 (X-Rite ColorMunki)' succeeded munki_init_coms: init coms has suceeded munki_init_inst: called munki_init: munki_getfirm: munki_getfirm: returning fwrev 1.32, tickdur 32, minint 224, eeblks 2, eeblksz 8192 ICOM err 0x0 Firmware rev = 1.32 minintcount 224, min_int_time = 0.007168 munki_getchipid: called GetChipID returns 01-4B7336120000D7 ICOM err 0x0 munki_getversionstring: called munki_getversionstring: returning 'colormunki FW V1.32 Build Nr. 1303' ICOM err 0x0 munki_readEEProm: address 0x4 size 0x4 munki_readEEProm: got 0x4 bytes, ICOM err 0x0 munki_readEEProm: address 0x0 size 0x1fe9 munki_readEEProm: got 0x1fe9 bytes, ICOM err 0x0 munki_parse_eeprom: called with 8172 bytes munki_parse_eeprom: cal chsum = 0xa48ff063, should be 0xa48ff063 - OK Normal non-lin = 0.0000000000 1.0106836557 -0.0000019789 0.0000000001 High Gain non-lin = 0.0000000000 0.2068388760 -0.0000012635 0.0000000001 highgain = 4.834681 Switch thread started munki_waitfor_switch_th: Read 8 bytes from switch hit port munki_restore_calibration restoring from file '/home/manu/.cache/ArgyllCMS/.mk_2016629.cal' munki_restore_calibration: 162 secs from instrument last open munki_restore_calibration done munki_touch_calibration touching file '/home/manu/.cache/ArgyllCMS/.mk_2016629.cal' munki_setindled: 1000, 0, 0, -1, 0 munki_setindled: OK ICOM err 0x0 munki_setindled: 0, 0, 0, 0, 0 munki_setindled: OK ICOM err 0x0 munki_init_inst: instrument inited OK munki_imp_set_mode called with 1 munki_imp_get_n_a_cals: checking mode 1 Invalidating adaptive dark cal as 1376886489 secs from last cal munki_imp_get_n_a_cals: returning n_cals 0x60, a_cals 0x60 inst_handle_calibrate called About to call calibrate at top of loop munki_imp_calibrate called with calt 0x2, calc 0x0 munki_imp_get_n_a_cals: checking mode 1 Invalidating adaptive dark cal as 1376886489 secs from last cal munki_imp_get_n_a_cals: returning n_cals 0x60, a_cals 0x60 munki_getstatus: called munki_getstatus: Sensor pos. Surface, Button state Released, ICOM err 0x0 Calibrating mode 1 Calibrate returned calt 0x60, calc 0x60, ev 0x127a About to call calibrate at top of loop munki_imp_calibrate called with calt 0x60, calc 0x60 munki_imp_get_n_a_cals: checking mode 1 Invalidating adaptive dark cal as 1376886498 secs from last cal munki_imp_get_n_a_cals: returning n_cals 0x60, a_cals 0x60 munki_getstatus: called munki_getstatus: Sensor pos. Calibration, Button state Released, ICOM err 0x0 Calibrating mode 1 Doing initial display black calibration with dcaltime 0.500000, int_time 0.007168, nummeas 70, gainmode 0 munki_dark_measure with inttime 0.007168 munki_triggermeasure: lamp 0, scan 0, gain 0, intclks 224, nummeas 70 munki_triggermeasure: OK ICOM err 0x0 munki_readmeasurement: inummeas 70, scanflag 0, address 0x170f780 bsize 0x4aec, timout 1.501760 munki_readmeasurement: Read 70 readings, ICOM err 0x0 (Trig & rd times 1 0 526 0) munki_sens_to_raw: Dark thrheshold = 1786.885714 munki_average_multimeas 70 readings (darkthresh 1786.885714) norm = 1787.070312, dark thresh = 5000.000000 Doing initial white calibration with current inttime 0.007168, gainmode 0 ulimit 1.111111, llimit 0.909091 fulimit 1.054093, fllimit 0.953463 munki_heatLED called Triggering measurement cycle, nummeas 64, inttime 0.015680 munki_triggermeasure: lamp 1, scan 0, gain 0, intclks 490, nummeas 64 munki_triggermeasure: OK ICOM err 0x0 Gathering readings munki_readmeasurement: inummeas 64, scanflag 0, address 0x170f780 bsize 0x4480, timout 2.003520 munki_readmeasurement: Read 64 readings, ICOM err 0x0 (Trig & rd times 1 0 1065 0) Doing a white calibration with trial int_time 0.007168, gainmode 0 munki_whitemeasure called Triggering measurement cycle, ninvmeas 14, nummeas 70, inttime 0.007168, gainmode 0 munki_triggermeasure: lamp 1, scan 0, gain 0, intclks 224, nummeas 84 munki_triggermeasure: OK ICOM err 0x0 Gathering readings munki_readmeasurement: inummeas 84, scanflag 0, address 0x170f780 bsize 0x59e8, timout 1.602112 munki_readmeasurement: Read 84 readings, ICOM err 0x0 (Trig & rd times 9 0 631 0) munki_sens_to_raw: Dark thrheshold = 1789.285714 munki_average_multimeas 70 readings (darkthresh -43.576817) norm = 88953.329062, dark thresh = 5000.000000 Average absolute sensor readings, avg 88947.329712, max 259062.489966, darkth -43.576817 satth 1447621.190337 Targscale 0.100000, maxval 259062.489966, optimal target = 114626.376605, amount to scale = 0.442466 Needed scale is 0.442466 munki_optimise_sensor called, inttime 0.007168, gain mode 0, scale 0.442466 target inttime 0.001211, gain mode 0 after low light adjust, inttime 0.001211, gain mode 0 after low light clip, inttime 0.001211, gain mode 0 after high light adjust, targoscale 0.226006, inttime 0.002736, gain mode 0 after high light clip, returning inttime 0.002736, gain mode 0 munki_optimise_sensor returning inttime 0.007168, gain mode 0 New inttime = 0.007168 Doing a white calibration with trial int_time 0.007168, gainmode 0 munki_whitemeasure called Triggering measurement cycle, ninvmeas 14, nummeas 70, inttime 0.007168, gainmode 0 munki_triggermeasure: lamp 1, scan 0, gain 0, intclks 224, nummeas 84 munki_triggermeasure: OK ICOM err 0x0 Gathering readings munki_readmeasurement: inummeas 84, scanflag 0, address 0x170f780 bsize 0x59e8, timout 1.602112 munki_readmeasurement: Read 84 readings, ICOM err 0x0 (Trig & rd times 1 0 629 0) munki_sens_to_raw: Dark thrheshold = 1789.328571 munki_average_multimeas 70 readings (darkthresh -43.563772) norm = 88960.444199, dark thresh = 5000.000000 Average absolute sensor readings, avg 88966.211040, max 259196.612226, darkth -43.563772 satth 1447615.225587 Targscale 0.226006, maxval 259196.612226, optimal target = 259061.145544, amount to scale = 0.999477 Needed scale is 0.999477 Close enough for early exit Waiting 1.000000 secs for LED to cool Doing another reflective black calibration with dcaltime 0.500000, int_time 0.007168, nummeas 70, gainmode 0 munki_dark_measure with inttime 0.007168 munki_triggermeasure: lamp 0, scan 0, gain 0, intclks 224, nummeas 70 munki_triggermeasure: OK ICOM err 0x0 munki_readmeasurement: inummeas 70, scanflag 0, address 0x170f780 bsize 0x4aec, timout 1.501760 munki_readmeasurement: Read 70 readings, ICOM err 0x0 (Trig & rd times 1 0 524 0) munki_sens_to_raw: Dark thrheshold = 1786.814286 munki_average_multimeas 70 readings (darkthresh 1786.814286) norm = 1786.984375, dark thresh = 5000.000000 munki_ledtemp_whitemeasure called Triggering measurement cycle, ninvmeas 14, nummeas 419, inttime 0.007168, gainmode 0 munki_triggermeasure: lamp 1, scan 0, gain 0, intclks 224, nummeas 433 munki_triggermeasure: OK ICOM err 0x0 Gathering readings munki_readmeasurement: inummeas 433, scanflag 0, address 0x170f780 bsize 0x1cf72, timout 4.103744 munki_readmeasurement: Read 433 readings, ICOM err 0x0 (Trig & rd times 1 0 3131 0) munki_sens_to_raw: Dark thrheshold = 1789.230907 Computed linear regression munki_average_multimeas 419 readings (darkthresh -35.649592) norm = 89112.175615, dark thresh = 5000.000000 munki_compute_white_cal called munki_save_calibration saving to file '/home/manu/.cache/ArgyllCMS/.mk_2016629.cal' Checkum = 0x71a4c48f Writing calibration file succeeded Finished cal with dark_valid = 1, cal_valid = 1 Calibrate returned calt 0x0, calc 0x60, ev 0x0 inst_handle_calibrate done 0x0 munki_imp_measure called Taking 14 measurments in Refl Scan mode called ############# triggered ############## munki_imp_measure user aborted, terminated, command, or failure munki_del called munki_touch_calibration touching file '/home/manu/.cache/ArgyllCMS/.mk_2016629.cal' munki_simulate_event: 0x100 munki_simulate_event: 0x100 done, ICOM err 0x0 munki_simulate_event: terminate switch thread failed, canceling I/O