[argyllcms] Re: I1 Display Pro not working in Argyll v1.3.4?
- From: János, Tóth F. <janos666@xxxxxxxxxx>
- To: argyllcms@xxxxxxxxxxxxx
- Date: Wed, 14 Sep 2011 21:59:06 +0200
That should be the i1pro.inf but it doesn't really important because Windows
will read in every infs from the directory anyway.
So, click on any of these and proceed with the installation.
2011/9/14 Steven Dobbelaere <steven.dobbelaere@xxxxxxxxxx>
> There is no .inf file available for the I1 display pro:
>
> -> see screenshot
>
>
> I can't follow the guide step by step because i'm stuck at this step:
> Adding Argyll drivers to existing drivers:
> In Vista/Win 7:
> Plug the instrument that you want to install the the computer.
> Right click on the "Computer" item in the Start menu and select "Manage".
> Click on "Device Manager"
> Locate the device in the device manager. It may be underneath one of the
> top level "USB" items.
>
> => I don't see a device which is named I1 display pro ... !
>
> Was anybody able to see this device in the device manager on win7?
>
>
> Kr,
> Steven
>
>
> Op 9/14/2011 8:34 PM, Steven Dobbelaere schreef:
>
> Alan, Pictus,
>
> I thought it was not needed:
>
> http://www.argyllcms.com/doc/Installing_MSWindows.html =>
>
> "Note that the Huey and i1 Display Pro and ColorMunki Display colorimeter
> appears as an HID (USB Human Interface Device Class) device, and hence will
> be assigned to the default MSWindows HID driver, rather than popping a "New
> Hardware" dialog. You normally don't need to install an Argyll libusb1driver
> for these devices."
>
> But I will install the drivers to give it a try.
>
> Kr,
> Steven
>
>
> Op 9/14/2011 8:18 PM, Alan Goldhammer schreef:
>
> I've not seen this type of error message in my use of the i1 Pro. You don't
> say whether you installed the Argyll device driver or not. I know that this
> is required for the i1 Pro to work with Argyll software (I assume the same
> to be true for this one but could be wrong; for more details on hardware
> see: http://www.argyllcms.com/doc/Installing_MSWindows.html )
>
> Alan
>
> -----Original Message-----
> From: argyllcms-bounce@xxxxxxxxxxxxx [mailto:argyllcms-bounce@xxxxxxxxxxxxx
> <argyllcms-bounce@xxxxxxxxxxxxx>]
> On Behalf Of Steven Dobbelaere
> Sent: Wednesday, September 14, 2011 2:05 PM
> To: argyllcms@xxxxxxxxxxxxx
> Subject: [argyllcms] I1 Display Pro not working in Argyll v1.3.4?
>
> Hi,
>
> I'm a new user of Argyll, my first steps...
> I'm trying to calibrate my monitor with my new I1 display pro.
> The device is recognized in the i1profiler software but I can't get it
> working in Argyll.
> What am I doing wrong?
>
> Check this movie to see that the device is recognized by windows and the
> i1 profiler software:http://screencast.com/t/J3JTsuWSp
>
> Here is what I get in Argyll:
>
> C:\Argyll_V1.3.4\bin>dispread -v -c 4 -y l f500
> Number of patches = 836
> Setting up the instrument
> dispread: Error - icoms - usb_is_usb_portno: port number out of range!
>
> C:\Argyll_V1.3.4\bin>dispcal -r
> dispcal: Error - icoms - usb_is_usb_portno: port number out of range!
>
>
> Monitor: HP LP2475w
> OS: Windows 7 Home Premium / English
>
>
>
> THx!
> Steven
>
>
>
>
>
>
>
>
Other related posts:
