2010/1/6 Graeme Gill <graeme@xxxxxxxxxxxxx>: > > To address the couple of problems noticed in RC3, I've just put V1.1.0 RC4 > up > on the website. > > Sources: <http://www.argyllcms.com/Argyll_V1.1.0_RC4_src.zip> I just found some time to test this RC but hit a bug (not new, it was in 1.0.2 too) when display is not running at 24bpp : dispcal (or dispwin) complained with the following error message ( Xorg 1.7 / latest intel driver): dispcal : Warning - Native mode can't work. no VideoLUT support dispcal: Error new_disprt() failed with 'Window Access Failed' rebuilding with debug was a little more helpful : Checking XRandR 1.2 VideoLUT access Display 0 name = ':0.0' Unable to intern atom 'EDID_DATA' Got EDID for display new dispwin called About to exit new_dispwin() dispwin_get_ramdac() called Getting gamma using RandR 1.2 XRRGetCrtcGammaSize number of entries 256 mismatches screen depth 64 Dispwin; Error - We don't have access to the VideoLUT. Maybe argyllcms could hint the screen depth is incorrect as a possible explanation when error is occuring ? -- Frederic Crozat