[aravis] Re: Failed to load genicam data

  • From: Emmanuel Pacaud <emmanuel.pacaud@xxxxxxxxxxxxx>
  • To: aravis@xxxxxxxxxxxxx
  • Date: Mon, 16 Feb 2015 10:38:20 +0100

Hi Justin,
On ven., févr. 13, 2015 at 1:46 , Justin Morton <justin.morton@xxxxxxxxxxxxxxxxx> wrote:
I am occasionally seeing the error "Failed to load genicam data" when attempting to connect to my camera by calling arv_camera_new( NULL );.
Any idea as to what would cause this to occur? I do not notice any differences in the system between when it connects and when it fails.
I am using the 0.3.7 release of aravis on a picoZed board, with the Imperx camera connected directly to the board's eth1. 

[GvDiscoverSocket::new] Add interface 127.0.0.1
[GvDiscoverSocket::new] Add interface 10.160.1.10
[GvDiscoverSocket::new] Add interface 10.160.2.10
[GvDiscoverSocket::new] Add interface 10.160.3.10
[GvInterface::discovery] Device 'Imperx, inc.-200036' found (interface 10.160.2.10) user_name '' - MAC_name '00:11:1c:00:df:73' 
[GvDevice::new] Interface address = 10.160.2.10
[GvDevice::new] Device address = 10.160.2.99
[GvDevice::load_genicam] xml url = 'Local:IGV_6620_v10A_1_0_10_B3C1E6AB.zip;3fff8000;8220' at 0x200 [GvDevice::load_genicam] Xml address = 0x3fff8000 - size = 0x8220 - IGV_6620_v10A_1_0_10_B3C1E6AB.zip 
[GvDevice::load_genicam] xml url = '' at 0x400
[GvDevice::new] Failed to load genicam data
Could you try to capture this event with full debugging, i.e. with the -d all:3 option ? 

Thanks.

        Cheers,

                Emmanuel.

Other related posts:

  1. Home
  2. aravis
  3. Archive
  4. 02-2015