[aravis] Failed to load genicam data
- From: Justin Morton <justin.morton@xxxxxxxxxxxxxxxxx>
- To: aravis@xxxxxxxxxxxxx
- Date: Thu, 12 Feb 2015 16:46:51 -0800
I am occasionally seeing the error "Failed to load genicam data" when
attempting to connect to my camera by calling arv_camera_new( NULL );.
Any idea as to what would cause this to occur? I do not notice any
differences in the system between when it connects and when it fails.
I am using the 0.3.7 release of aravis on a picoZed board, with the Imperx
camera connected directly to the board's eth1.
[GvDiscoverSocket::new] Add interface 127.0.0.1
[GvDiscoverSocket::new] Add interface 10.160.1.10
[GvDiscoverSocket::new] Add interface 10.160.2.10
[GvDiscoverSocket::new] Add interface 10.160.3.10
[GvInterface::discovery] Device 'Imperx, inc.-200036' found (interface
10.160.2.10) user_name '' - MAC_name '00:11:1c:00:df:73'
[GvDevice::new] Interface address = 10.160.2.10
[GvDevice::new] Device address = 10.160.2.99
[GvDevice::load_genicam] xml url =
'Local:IGV_6620_v10A_1_0_10_B3C1E6AB.zip;3fff8000;8220' at 0x200
[GvDevice::load_genicam] Xml address = 0x3fff8000 - size = 0x8220 -
IGV_6620_v10A_1_0_10_B3C1E6AB.zip
[GvDevice::load_genicam] xml url = '' at 0x400
[GvDevice::new] Failed to load genicam data
Thanks,
Justin
--
*Information contained herein is subject to the Code of Federal Regulations
Chapter 22 International Traffic in Arms Regulations. This data may not be
resold, diverted, transferred, transshipped, made available to a foreign
national within the United States, or otherwise disposed of in any other
country outside of its intended destination, either in original form or
after being incorporated through an intermediate process into other data
without the prior written approval of the US Department of State. **Penalties
for violation include bans on defense and military work, fines and
imprisonment.*
Other related posts:
