So is it possible to run arachne through a command box in Win XP? Michael At 02:01 PM 1/9/2011 -0600, you wrote:
Arachne at FreeLists---The Arachne Fan Club! Thanx for the reply L.D. I might look for that utility. My straight up DOS box, which only has FreeDOS on the harddrive, connects just fine thru the router. Lynx was a problem there too. I have lynx going now in dosemu, but it took a much different approach than that I took on the straight DOS box. I'll check with survpc also. Rob On Sun, 9 Jan 2011, L.D. Best wrote:Arachne at FreeLists---The Arachne Fan Club!iirc, there is a program out there somewhere which allows you to affix an ID/name to a computer running DOS. Until you can do that, the router has no way to "identify/connect to" a DOS system.Hang in ... because I'm sure someone out there knows the answer. Also, a more active group more likely to have the answer sooner: LifeRaft <survpc@xxxxxxxxxxx> l.d. ==== Rob wrote:Arachne at FreeLists -- Arachne, The Premier GPL Web Browser/Suite for DOS --Arachne at FreeLists---The Arachne Fan Club! Hey Folks, I'm using Arachne in Linux using Dosemu, but I have a problem. I can connect to the internet with Arachne and Doslynx, not Lynx tho as of yet, but only when my computer is connected directly to the modem. I can't seem to connect when running thru my router. The router is a Linksys WRT54GL running Tomato firmware. I have a DSL connection. I've tried both dynamic and static TCP/IP connections and a gazillion different configurations on the router, computer, and configs for the browsers. No go with the router between the computer and modem. I've used OpenDOS7.01, DrDOS7.03, and now FreeDOS1.0 installed. Anyone else had this problem? Did you solve it? If so how? I should specify that I'm using the default packet driver that Dosemu uses. Any help or info would be appreciated! Rob-- -----Pine Email on Slackware GNU/Linux----- Arachne at FreeLists -- Arachne, The Premier GPL Web Browser/Suite for DOS --