[amayausers.com] Re: eps files and converting
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Fri, 19 Oct 2012 14:30:13 UT
This message was posted by Yan on AmayaUsers.com. PLEASE DO NOT REPLY VIA
EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/3/724.html#000005
Jerome, It sounds like flatten overlap is a good way to go with about 1/8"
overlap at least along with an edge walk of 4 or 5 points. Does this also work
for more complex shapes? - Have a 1/8" flaten overlap with the overlap on the
complex shapes?
How about lettering? At what point does one decide to either place the
lettering on top of an embroidered area or "cut" into the area - dealing with
the same stuff as mentioned above and trying to increase the overlap?
Yan
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
