[amayausers.com] Re: dongles
- From: theboards@xxxxxxxxxxxxxx
- To: amayausers@xxxxxxxxxxxxx
- Date: Tue, 7 Jun 2011 15:25:00 UT
This message was posted by Rod or Sharon on AmayaUsers.com. PLEASE DO NOT REPLY
VIA EMAIL. Instead, respond to the thread on the WEBSITE by clicking here:
http://www.amayausers.com/boards/cgi-bin/ultimatebb.cgi?/topic/1/1186.html#000003
Greg,
Do you have Flex + ? If so there still isn't any reason to have them set up as
separate pods.
If all you have is Flex and not Flex + then separating the machines would give
you some more flexibility. The difference between Flex and Flex +.....Flex
allows you to network as many machines as the ethernet cards will support, but
they will all have to sew the exact same design. Flex + will allow the same ,
but also allows different designs to be loaded to each individual machine from
the one computer to be sewn simultaneously.
Rod Springer
Amaya Tech & Trainer
===========================================================
The AmayaUsers Mailing List
Website: http://www.amayausers.com
Discussion Board: http://www.amayausers.com/boards
Subscribe/Unsubscribe: http://www.amayausers.com/list
===========================================================
Other related posts:
