Anand The XT I have is the current model with the small round cylindrical arm, round needle plate and the new Cap driver. It is the same machine as was demonstrated at the ISS show in California Glenn -----Original Message----- From: amayausers-bounce@xxxxxxxxxxxxx [mailto:amayausers-bounce@xxxxxxxxxxxxx] On Behalf Of Kesavan Sent: Wednesday, 12 April 2006 8:35 AM To: amayausers@xxxxxxxxxxxxx Subject: [amayausers] Re: amaya xt Glen, Thanks for the reply. The only reason I bought the Amaya was because of the cylidrical small arm. Otherwise I would have chosen a Happy. I am sorry I will not be interested in your older version XT. Good luck Anand The XT was released in September 2005, The official release was mid Januar= y 2006 to coincide with the ISS show in Long Beach=2E The pre release XT machines were Red/White or Red/Grey with the machines sold from Feb 2006 a= combination of Red/ Grey & Black/Grey I did training on the new XT machines in Colorado in late January and they= were all Red/Grey=2E The main asthetical / mechanical differance was the smaller 'arm' & the updated cap frame thaty didn't require a change to the plate on the arm & allowed for a bigger stitch area=2E Thedre was also the change to the thread feed however this was an update available to earlier model machines=2E There is also the serial number that signifies the machine model difference=2E This was the subject of an earlier thread=2E=20 Glenn Global Embroidery Original Message: ----------------- From: Kesavan kesavan@bigpond=2Enet=2Eau Date: Tue, 11 Apr 2006 13:29:39 +1000 To: amayausers@freelists=2Eorg Subject: [amayausers] amaya xt Could some please tell me when the Amaya XT came out Thanks Anand -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web=2Ecom/ =2E